Abstract:In this paper, the dynamic behavior of a rotor system with electromechanically coupled boundary condition under periodic axial load is studied, where the boundary condition is derived from a ring-shaped piezoelectric damper which is developed for vibration control of rotor system. This damper is based on the piezoelectric shunt damping technique, which can produce much or little damping performance depends on the selection of shunt circuit parameters. By using assumed mode method and Lagrange equation, the equations of motion are derived. Actually these equations can also be derived from a general forced parametrically excited gyroscopic system. Thus, to analyze such system, a method of multiple scales is developed firstly, where a general procedure is proposed to establish solvability conditions. Subsequently, this procedure is applied to obtain the analytical instability boundaries and forced vibration responses. The analytical results show that the additional combination instability regions are created due to the introduction of shunt circuit. When the parametrically excited eccentric rotor is rotating, the parametric vibrations are superimposed on the unbalanced responses. As the resistance value of shunt circuit is increasing, both parametric vibrations and unbalance vibrations can be significantly suppressed. For the unbalanced responses, both the resonance and anti-resonance phenomena can be observed; whereas for the parametric vibrations, only the resonance phenomena exist. These phenomena indicate that we may achieve great vibration control performance for the rotor parametric vibrations by introducing the piezoelectric shunt damping, as long as the circuit parameters are well adjusted. To validate the obtained analytical expressions, the numerical methods are applied. Specifically, the discrete state transition matrix method (DSTM) is applied to validate the analytical instability boundaries and the Runge-Kutta method is conducted to verify the analytical frequency response functions.

Response Measurements of a Rotating Mistuned Bladed Disk under Swept-Sine Excitations in a New Vacuum Experimental Facility

Vibrational Response Analysis of Rotating Mistuned Bladed-Disk Using a Deconvolution Method Based on Blade Tip Timing

Thermally Excited Micromechanical Vacuum Resonator

Forward and Backward Mode Excitation of Flexible Rotor Supported by Tilting Pad Bearings - Numerical and Experimental Investigation

Investigation on the Vibration Localization of Mistuned Bladed Disk with Frictional Contact

An Experimental Platform with Rotating Airflow Excitation and Stationary Blisk Vibration Measurement

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

Vibration Analysis of Mistuned Damped Blades with Nonlinear Friction and Contact

Theoretical analysis of a parametrically excited rotor system with electromechanically coupled boundary condition

A High-Frequency Excitation and Vibration Test System for Turbine Blades in Aviation Rotors

Measurements of radiation vibrations of turbomachine blades using an optical-fiber displacement-sensing system

Nonlinear Dynamics Analysis Of Mistuned Turbine Bladed Disks With Damped Shrouds

Investigation of Vibration Characteristics for Dry Friction Damped Blades with High-fidelity Finite Element Model

Experimental Investigation on the Accuracy of Blade Tip Timing Spectral Analysis Methods

Rapid Investigation of Blisk Mistuning Via Piezoelectric-Induced Stiffness Perturbations

Flap-wise Vibrations of Non-Uniform Rotating Cantilever Beams: an Investigation with Operational Experiments

The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations

Investigation on the parameter sensitivity of bladed assemblies undergoing mistuning features

Vortex-induced Vibrations of an Elastically Mounted Disk: the Characteristics of Wake and Trajectory

Experimental Damping Behavior of Strongly Coupled Structure and Acoustic Modes of a Rotating Disk With Side Cavities

Vibration response prediction of coated blisks under multi-point non-contact excitations using mistuning identification data