Abstract:CdSe 0.3 S 0.7 /CdSe quantum dot sensitized solar cells are a desirable choice for increasing photovoltaic efficiency due to their high light-harvesting efficiency. In this study, the CdSe 0.3 S 0.7 chalcogenide quantum dots were adsorbed onto the TiO 2 NPs mesoporous film using the successive ionic layer adsorption and reaction (SILAR) method with variation cycles ranging from 1 to 7. when the thickness of the CdSe 0.3 S 0.7 quantum dots is modified, the quantum dot sensitized solar cell with TiO 2 NPs /CdSe 0.3 S 0.7 (5c)/ZnS photoanode shows higher short circuit current density (J SC ), open circuit voltage (V OC ) and power conversion efficiency (PCE) values of 17.80 mA/cm 2 , 530 mV and 3.25%, respectively. The corresponding photoelectrode according to the results of Surface morphology analyses is still suitable for loading other quantum dots, because there are still large pores on the surface. The CdSe QDs were loaded using the Chemical Bath Deposition (CBD) technique at various times from 6 -15 minutes' coverage of TiO 2 NPs/CdSe 0.3 S 0.7 photoanode. The optimal thickness of the CdSe layer causes its energy levels to be aligned with the other layers and allowing photogenerated carriers to move between bands with a strong driving force before recombination. The cell with the TiO 2 NPs/CdSe 0.3 S 0.7 (5 cycles)/CdSe(12min)/ZnS photoelectrode has the highest J SC , V OC and PCE values of 24.70 mA/cm 2 , 580 mV and 6.25%, respectively. The efficiency increased by 92% compared to the reference cell, which only included CdSe0.3S0.7 QDs, and the IPCE and APCE curves had higher intensities and spanned a wider range of visible wavelengths. These changes are the result of enhanced light harvesting efficiency.

Improved UV sensitivity and charge transport in PTB7-Th:PC 71 BM solar cells doped with cadmium selenide quantum dots

CdSe Quantum Dots Sensitized Mesoporous TiO2Solar Cells with CuSCN As Solid-State Electrolyte

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Study on the influence of embedded structure of carbon quantum dots of the organic solar cells with the territory active layer structure of P3HT: PC 61 BM: CQDs

Enhancement of the power conversion efficiency of polymer solar cells by functionalized single-walled carbon nanotubes decorated with CdSe/ZnS core–shell colloidal quantum dots

The Design of Mn2+&Co2+ Co-Doped CdTe Quantum Dot Sensitized Solar Cells with Much Higher Efficiency.

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

Microwave Assisted Cdse Quantum Dot Deposition on Tio2 Films for Dye-Sensitized Solar Cells

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

PdSe2 Quantum Dots for Improving the Photovoltaic Performance of Nonfullerene Organic Solar Cells

Performance enhancement of PbS‐TBAI quantum dot solar cell with MoTe2 as hole transport layer

Improved Charge Separation And Transport Efficiency In Panchromatic-Sensitized Solar Cells With Co-Sensitization Of Pbs/Cds/Zns Quantum Dots And Dye Molecules

Organic Hole Transport Materials for High Performance PbS Quantum Dot Solar Cells

Lithium Salt Doped Organic Conjugated Hole Transport Layer for High Performance PbS Quantum Dot Solar Cells

Boosting the efficiency of quantum dot–sensitized solar cells over 15% through light‐harvesting enhancement

Thiosulfate-terminated CdSe quantum dots for improving the performance and stability of perovskite solar cells

Performance Enhancement of Hole Transport Layer-Free Carbon-Based CsPbIBr2 Solar Cells through the Application of Perovskite Quantum Dots

Highly efficient hybrid solar cells with tunable dipole at the donor-acceptor interface.

The approach of increasing incident photon absorption and decreasing charge recombination in solar cells by regulating the bandgap energies of the CdSe 0.3 S 0.7 /CdSe photosensitizer layer

CdSe@CdS Core–Shell Quantum Dot-Polymer Multilayer Sensitized TiO<SUB>2</SUB> for Photovoltaics

Promotion of performances of quantum dot solar cell and its tandem solar cell with low bandgap polymer (PTB7-Th):PC71BM by water vapor treatment on quantum dot layer on its surface