A Comparative Study on the Prediction of Hydrogen, Nitrogen and Water Vapor of Regenerative Hydrogen Pump with Different Turbulence Models

Tao Yang,Shengke Wang,Jinju Sun
DOI: https://doi.org/10.1115/1.4066644
2024-01-01
Journal of Fluids Engineering
Abstract:Abstract The flow in a regenerative hydrogen pump used in a proton exchange membrane (PEM) fuel cell system is complex, including velocity mixing, streamline distortion, swirling flow, corner flow and possible boundary separation. Experimental measurement and CFD prediction are the main methods used to evaluate such performance. In this work, regenerative hydrogen designed for fuel cell electric vehicles (FCEVs) with an impeller diameter of 91 mm and a shaft speed of 22000 rpm is tested with a mixture of nitrogen, hydrogen and water vapor. During the test, the flowrate and shaft speed ranges are 151 L/min~881 L/min and 8000 rpm~22000 rpm, respectively. The inlet pressure and temperature are 171kPa and 66°C, respectively. Then, the flow is predicted by the k-ε model, the RNG k-ε model, the EARSM and the SST-DES model. The differences between the tested and predicted performances are compared. With these results, the velocity distribution in the side channel, the radial force of the impeller and casting, and the changes in the downstream pressure and velocity are analyzed in consideration of the ability of the turbulence models to simulate each characteristic flow. On this basis, the differences and abilities of the turbulence models for predicting the flow in regenerative hydrogen pumps are summarized.
What problem does this paper attempt to address?