Extrinsic Parameters Optimization for Fringe Projection System Based on Standard Components

Huixin Song,Lingbao Kong,Xinlan Tang,Xialiang Xu,Bo Wang

DOI: https://doi.org/10.1016/j.measurement.2024.115836

IF: 5.6

2025-01-01

Measurement

Abstract:Fringe projection profilometry (FPP) is a wildly used three-dimension reconstruction method, where the reconstruction accuracy is closely related to the calibration precision. However, various sources of error in the calibration process can result in inaccurate calibration results. In particular, the calibration results of extrinsic parameters are more likely to deviate from the true values, which in turn leads to low-frequency errors in the reconstruction results. In order to obtain the extrinsic parameters closer to the true values, a simple but effective method is proposed in this paper. The proposed method utilizes the standard plane and the dumbbell bat, which are commonly used in measurements, to optimize the extrinsic parameters. First, the standard plane and dumbbell bat are reconstructed using the initial calibration results to transfer the errors in the extrinsic parameters to the plane fitting residuals, as well as to the fitting residuals for the radius and the center distance of dumbbell bat. The residuals and errors are then minimized using nonlinear optimization, resulting in the more accurate extrinsic parameters. Experimental results demonstrate that the proposed method can effectively compensate the calibration error of the extrinsic parameters. The root mean square (RMS) error of planar reconstruction is reduced from 0.0291 mm to 0.0106 mm, which is reduced by about 63.6 %. The RMS error of spherical reconstruction is reduced from 0.0358 mm to 0.0166 mm, which is about 53.6 %. The measurement accuracy of the FPP system is further improved.