Abstract:A design scheme combining grating and element additive metasurface is proposed in this paper. Multi-dimensional joint control of the phase, amplitude, angle and polarization and multi-functional integrated metasurface applications were realized by using the inherent characteristics of the light wave properties (polarization and wavelength). Firstly, the reflection response of the element structure was analyzed to find the appropriate structural parameters, and a phase gradient metasurface arrays with 2-bit coding was made by introducing the addition operation between the element structures. Combined with the polarization selectivity of the lower grating, the dual-function integration of asymmetric transmission (the contrast ratio is 98%) and abnormal reflections (operating bandwidth is 300nm) was realized. Next, two new half-wave plates were obtained by addition and rotating the elemental structure, and the polarization conversion efficiency of 95% and 97% was achieved thanks to the Fabry-Perot cavity formed by the upper metasurface and lower grating.Finally, a new set of metasurface structure is obtained based on the geometric phase principle, which achieves cross-polarization wave deflection characteristics with 300nm bandwidth and nearly 100% polarization transformation efficiency. Our work combines grating structure with element additive metasurface to construct a multifunctional metasurface design scheme based on multiple combinations of element structures. The composite metasurface design method proposed to solve the problem that the element structure needs to be redesigned with the change of function, and also paves the way for the application of multifunctional integrated metasurfaces in optical sensing, optical imaging and other fields.

Frequency Beam Scanning with Wideband Dualpolarized Metagratings for Large-angle Incidence

Polarization-Insensitive Metasurface with High-Gain Large-Angle Beam Deflection

A Dual-Polarized and Reconfigurable Metasurface for Manipulation of Electromagnetic Waves

Sub-THz Broadband Transmitting Metasurfaces with Enhanced Frequency-Scanning Capability

Ultra-wideband, High-Efficiency Beam Steering Based on Phase Gradient Metasurfaces

A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication

A Novel Wideband and High-Efficiency Electronically Scanning Transmitarray Using Transmission Metasurface Polarizer

Fully analytical design of electromagnetic transmissive metagratings for highly efficient extreme-angle beam refraction and reflection

Frequency Scanning Dual-Mode Asymmetric Dual-OAM-Wave Generation Base on Broadband PB Metasurface

Ultrawideband and High-Efficiency Linear Polarization Converter Based on Double V-Shaped Metasurface

Polarization-frequency synergetic multiplexing terahertz metasurface

Quad-channel Independent Wavefront Encoding with Dual-Band Multitasking Metasurface.

Multifunctional beam modulation based on gratings combined with additive metasurfaces

A Ku-Band Reconfigurable Metasurface for Broadband Far-Field Beam Control

Terahertz Transmissive Metasurface for Realizing Beam Steering by Frequency Scanning

Terahertz Plasmonic Metagrating Design Simultaneously Enabling Broadband Extraordinary Transmission and Field Enhancement

Amplitude gradient-based metasurfaces for off-chip terahertz wavefront shaping

Terahertz Silicon Metagratings: High‐Efficiency Dispersive Beam Manipulation above Diffraction Cone (laser Photonics Rev. 17(7)/2023)

Frequency-Multiplexed Spin-Decoupled Metasurface for Low-Profile Dual-Band Dual-Circularly Polarized Transmitarray with Independent Beams

High-Efficiency, Dual-Band Beam Splitter Based on an All-Dielectric Quasi-Continuous Metasurface

Dual-Frequency Co-Aperture Control of Beam Scanning by Programmable Metasurface