Abstract:Combining Terahertz (THz) and Orbital Angular Momentum (OAM) technologies has great potential in high-speed wireless communication. Theoretically, OAM with different modes has strict orthogonality. The communication capacity of the system will improve significantly if OAM technology is applied to the THz communication system. Thus, the manner to generate a high-quality and dynamically controllable THz-OAM beam has been of significant interest to researchers in related fields. In this study, a double-layer transmissive metasurface that uses 3D printing as the processing method with a low cost and processing difficulty is designed. Note that the height of the unit cell for constructing the metasurface is configurable. As the height changes continuously, the phase of the transmitted wave covers 0～2\begin{document}${\pi }$\end{document} within 90~110 GHz, while the transmittance of the units is always higher than 88%. At 100 GHz, which is fed by a WR-10 standard waveguide horn antenna, OAM beams with different modes are generated by changing the relative rotation angle between the double-layer metasurface. The simulation results show that the metasurface antenna designed in this study can achieve OAM beams of \begin{document}$ l=1, \mathrm{2,3} $\end{document}, and the two-dimensional amplitude and phase results correspond with the characteristics of the corresponding modes. When \begin{document}$ l=1,\mathrm{ }2,\mathrm{ }3 $\end{document}, the OAM beam’s modal purity is 85.4%, 84.9%, and 83.4%, respectively. The measurement results include the results at frequency points of 90, 100, and 110 GHz. The results show that the OAM beam has a high-quality bandwidth of 20 GHz, which indicates that the metasurface antenna designed in this study has a wide working bandwidth at a high frequency and can be applied to high-frequency OAM communication.

Sub-THz Broadband Transmitting Metasurfaces with Enhanced Frequency-Scanning Capability

Broadband Quasi-continuous Metasurface for OAM Generation

Broadband Binary-Reflection-phase Metasurfaces with Undistorted Transmission Wavefront Via Mirror Symmetry

Terahertz Transmissive Metasurface for Realizing Beam Steering by Frequency Scanning

Reconfigurable Metasurface for Beamforming in Terahertz Band

Terahertz Bessel Beam Scanning Enabled by Dispersion-Engineered Metasurface

A Novel Wideband and High-Efficiency Electronically Scanning Transmitarray Using Transmission Metasurface Polarizer

A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication

Reconfigurable Mode Vortex Beam Generation Based on Transmissive Metasurfaces in the Terahertz Band

Design of a 1 Bit Broadband Space-Time-Coding Digital Metasurface Array for Beam Scanning

Free‐Standing Single‐Layer Metasurface for Efficient and Broadband Tailoring of Terahertz Wavefront

Multiple Tri-Beam Low Scanning Loss Metasurface Antenna for Wide-Angle Coverage by Superposing Focusing and Periodic Phases

Maximizing Beam-Scanning Angle in an Expected Bandwidth Based on Terahertz Metasurface with Dual-Mode Resonance

Broadband Trifunctional Metasurface and Its Application in a Lens Antenna

Dual-Frequency Co-Aperture Control of Beam Scanning by Programmable Metasurface

Amplitude gradient-based metasurfaces for off-chip terahertz wavefront shaping

Ultra-broadband and ultra-thin dual-polarization terahertz metasurface with half-reflection and half-transmission based on double-split-ring structure

Broadband Metasurfaces with Simultaneous Control of Phase and Amplitude

Frequency Beam Scanning with Wideband Dualpolarized Metagratings for Large-angle Incidence

Reconfigurable Angle Sensitive Metasurface for Multibeam Manipulation

Ultra-wideband, High-Efficiency Beam Steering Based on Phase Gradient Metasurfaces