Abstract:Visible light communication (VLC) is considered to be a promising technology for realizing intelligent transportation systems (ITSs) and solving traffic safety problems. Due to the complex and changing environment and the influence of weather and other aspects, there are many problems in channel modeling and performance analysis of vehicular VLC. Unlike existing studies, this study proposes a practical vehicle-to-infrastructure (V2I) VLC propagation model for a typical mountain road. The model consists of both line-of-sight (LOS) and non-line-of-sight (NLOS) links. In the proposed model, the effects of vehicle mobility and weather conditions are considered. To analyze the impact of the considered propagation characteristics on the system, closed-form expressions for several performance metrics were derived, including average path loss, received power, channel capacity, and outage probability. Furthermore, to verify the accuracy of the derived theoretical expressions, simulation results were presented and analyzed in detail. The results indicate that, considering the LOS link and when the vehicle is 50 m away from the infrastructure, the difference in channel gain between moderate fog and dense fog versus clear weather conditions is 1.8 dB and 3 dB, respectively. In addition, the maximum difference in total received optical power between dense fog conditions and clear weather conditions can reach 76.2%. Moreover, under clear weather conditions, the channel capacity when vehicles are 40 m away from infrastructure is about 98.9% lower than when they are 10 m away. Additionally, the outage probability shows a high correlation with the threshold data transmission rate. Therefore, the considered propagation characteristics have a significant impact on the performance of V2I-VLC.

Millimeter-Wave V2V Channel Characteristics in Underground and Open Parking Lots

Vehicular Communications: A Physical Layer Perspective

Transmission time analysis for hybrid V2V and V2I communications in multi-lane vehicular networks

Transmission Time Analysis For Hybrid V2v And V21 Communications In Multi-Lane Vehicular Networks

Propagation Channels for mmWave Vehicular Communications: State-of-the-art and Future Research Directions

Extending 5G NR V2X Mode 2 to Enable Integrated Sensing and Communication for Vehicular Networks

Non-stationary time-varying vehicular channel characteristics for different roadside scattering environments

Multiple-Frequency-Bands Channel Characterization for In-vehicle Wireless Networks

On the Feasibility of Integrating mmWave and IEEE 802.11p for V2V Communications

Reliability Evaluation of IEEE 802.11P-Based Vehicle-to-Vehicle Communication in an Urban Expressway

Measurements and Cluster-Based Modeling of Vehicle-to-Vehicle Channels With Large Vehicle Obstructions

Exploiting Location Information to Enhance Throughput in Downlink V2I Systems

Measured Channel Capacity of SIMO-UWB for Intra-Vehicle Communications

Channel Measurements and Modeling for Dynamic Vehicular ISAC Scenarios at 28 GHz

Non-stationarity Characteristics in Dynamic Vehicular ISAC Channels at 28 GHz

Modeling and Performance Study of Vehicle-to-Infrastructure Visible Light Communication System for Mountain Roads

Vehicular Blockage Modelling and Performance Analysis for mmWave V2V Communications

3D Modeling and Analysis of Cooperative Perception-Oriented Millimeter-Wave V2I Networks With Information Value-Based Relay

Vehicular Channel Characteristics and Modeling

Distributed and Scalable Radio Resource Management for mmWave V2V Relays towards Safe Automated Driving

Path Loss Models for V2V mmWave Communication: Performance Evaluation and Open Challenges