Abstract:Hard carbon (HC) materials have demonstrated great potential in sodium-ion storage; however, their application for lithium-ion storage continues to pose a challenge due to difficulties in managing carbon porosity. Most HCs exhibit completely capacitive responses when storing lithium ions, significantly hindering the nominal cell voltage of configured lithium-ion batteries. Herein, this study provides feasible solutions by introducing phenolic-formaldehyde resin-derived HCs with tunable microporous structures. The carbon porosity is well manipulated by tailoring chemically cross-linked environments via microwave-induced polymerization. A highly closed microporous HC (closed pore volume: 0.336 cm 3 g −1 ), verified by multiple gas (N 2 , O 2 , and CO 2 ) adsorptions, is successfully prepared by reducing the cross-linking degree. Combining in situ X-ray diffraction and ion-diffusion kinetic explorations, the linchpin has been clearly identified. Closed ultramicropores of <0.7 nm, which play the same role as the graphitic interlayer spacing in graphite, are termed as "active closed pores", because they can facilitate the insertion of lithium ions and mitigate substantial initial irreversible capacity by blocking the penetration of solvents. The HC with abundant active closed pores can deliver a reversible capacity of 550 mAh g −1 at 50 mA g −1 in 0.001–1.5 V, with an ultrahigh low-voltage plateau capacity of 230 mAh g −1 contributed by the lithium-ion insertion in active closed pores. The excellent rate capability (210 mAh g −1 at 2 A g −1 ) and cycling stability (90% capacity retention after 200 cycles at 0.1 A g −1 ) of this closed pore-rich HC are also confirmed, which is thus recognized as an ideal material for negative electrodes in lithium-ion batteries. This breakthrough discovery has enlightened the full potential of hard carbon materials for next-generation batteries.

Tailoring Closed Pore Structure in Phenolic Resin Derived Hard Carbon Enables Excellent Sodium Ion Storage

Hard carbon with an opened pore structure for enhanced sodium storage performance

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Achieving High Initial Coulombic Efficiency for Competent Na Storage by Microstructure Tailoring from Chiral Nematic Nanocrystalline Cellulose

Lithium-ion storage mechanism in closed pore-rich hard carbon with ultrahigh extra plateau capacity

Pore Structure Modification of Pitch‐Derived Hard Carbon for Enhanced Pore Filling Sodium Storage

Exploring Carbonization Temperature to Create Closed Pores for Hard Carbon As High-Performance Sodium-Ion Battery Anodes

Regulating closed pore structure enables significantly improved sodium storage for hard carbon pyrolyzing at relatively low temperature

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Understanding the Relationship of Closed Pore Structure in Biomass‐ derived Hard Carbon with Cellulose Regulating Strategy

Hybrid hard carbon framework derived from polystyrene bearing distinct molecular crosslinking for enhanced sodium storage

Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon

Pore Structure Regulation of Hard Carbon: Towards Fast and High-Capacity Sodium-Ion Storage

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Steric Hindrance Engineering to Modulate the Closed Pores Formation of Polymer-Derived Hard Carbon for High-Performance Sodium-Ion Batteries

Releasing Free Radicals in Precursor Triggers the Formation of Closed Pores in Hard Carbon for Sodium‐ion Batteries

From Micropores to Ultra-micropores inside Hard Carbon: Toward Enhanced Capacity in Room-/Low-Temperature Sodium-Ion Storage

Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage

Rationally Designing Closed Pore Structure by Carbon Dots to Evoke Sodium Storage Sites of Hard Carbon in Low‐Potential Region

Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance