Recovery of rare earth elements from acid mine drainage: A review of the extraction methods
Brian Mwewa,Margreth Tadie,Sehliselo Ndlovu,Geoffrey S. Simate,Elias Matinde
DOI: https://doi.org/10.1016/j.jece.2022.107704
IF: 7.7
2022-06-01
Journal of Environmental Chemical Engineering
Abstract:Acid mine drainage (AMD) poses severe environmental pollution problems due to its high acidity, toxic metals and sulphate content. Current methods to tackle the problem are inadequate and those that work are costly. However, AMD contain the rare earth elements (REEs) which remain very important due to the growing increase in their demand because of their critical and indispensable use in many high-tech industries today. The growing demand of the REEs should be met by an increase in supply. The recovery of REEs from AMD is an important development that would cushion REEs supply challenges, thus requires significant consideration. There are several techniques that have been used to recover metal ions from wastewater including AMD. This paper gives a review of typical treatment techniques, innovative developments and examples of the various technologies used for the recovery of REEs from different process solutions, which could be applied in the recovery of REEs from AMD. These techniques include chemical precipitation, solvent extraction, cloud point extraction, ion flotation, ion-exchange, adsorption, molecular recognition technology, magnetic separation and membrane filtration . It is clear from the literature surveyed that chemical precipitation, solvent extraction, ion-exchange and adsorption are the most studied techniques for the recovery of REEs from solutions. Precipitation, ion flotation and adsorption processes show significant potential in their application to recover REEs from AMD. However, the complex AMD chemistry with high concentration of heavy metals require development of integrated process flowsheets incorporating the removal of heavy metals prior to precipitation, ion flotation or adsorption to increase the purity of the REE product stream. On the other hand, these flowsheets should be developed with economic feasibility considerations. Whereas solvent extraction is the preferred method for recovery of rare-earth ions from concentrated aqueous waste streams and pregnant leaching solutions, this method is not recommended for removal of rare-earth ions from diluted aqueous waste streams such as AMD because of the unavoidable contamination of the aqueous phase by organic solvents. Ion-exchange resins and chelating resins also show potential. However, despite ion-exchange being a cheap process, the slow kinetics, large volumes of AMD and the potential of resin poisoning from the impurities in AMD make the process challenging. This necessitates research into developing IX resin suitable for AMD chemistry. In addition, there is recognized prospect of the application of magnetic separation, ionic liquids and cloud point extraction in the recovery of REEs from dilute solutions, although these technologies have not been tested in treating huge volumes of process solutions.
engineering, chemical, environmental