Abstract:We successfully synthesized Cu@Ag NPs paste, and they were successfully applied for joining Cu/Cu@Ag NPs paste/Cu firstly in air by the ultrasonic-assisted sintering (UAS) at a temperature of as low as 160 degrees C. Their sintered microstructures featuring with dense and crystallized phases are completely different with the traditional thermo-compression sintering. The shear strength of the joints reached to 54.27 MPa, exhibiting one order of magnitude higher than thermocompression sintering (TCS) at the same temperature (180 degrees C). This ultra-low sintering temperature and high performance of the sintered joints were ascribed to ultrasonic effects and systematically investigated. The ultrasonic vibrations had distinct effects on the metallurgical reactions of the joints, resulting in the contact and growth of Cu core and the stripping and connection of Ag shell, which contributes to the high shear strength. For the TCS, the sintering process can be characterized by two stages. Stage I includes the neck formation and growth among Ag layers through surface diffusion. This initial sintering of NPs does not require much thermal activation, so it can be obtained at a low temperature with weak bonding and the sintering rate is very low because of thinner Ag shells on Cu@Ag NPs. With the increase of temperature, part of core-shell nanoparticles would loss the shell and the Cu cores with fresh surfaces would be exposed and contact with others, leading to the occurrence of the Cu NPs sintering, which would step into the Stage II. Because of lower input energy, this Cu NPs sintering took place very limit. However, regarding to the UAS, due to overwhelming effects caused by the application of ultrasonic, the "dewetting" of Ag shells appears since the sharp increase of temperature, resulting in that the sintering process quickly reaches to the stage II. In this stage, the thin Ag shells shrink into tiny nodules on the Cu core surface, leading to fast sintering of the NPs. Because the tiny Ag nodules have extremely large surface to volume ratio, the starting temperature of sintering dramatically decreases based on the thermodynamic theory. Such low temperature sintering in air of Cu@Ag NPs to form die attachments with robust performances can be successfully applied in the fields of high power, auto electronics and harsh environmental device packaging.

Efficient Synthesis and Excellent Performance of Low-Temperature Sintering Cu@Ni Nanoparticle Materials for Power Electronic Packaging

Research Progress of Cu Nanoparticle Sintering Technology for Power Electronic Packaging

Facile Synthesis of Cu10Sn3 Nanoparticles and Their Sintering Behavior for Power Device Packaging

Ultra-low Temperature Sintering of Cu@Ag Core-Shell Nanoparticle Paste by Ultrasonic in Air for High-Temperature Power Device Packaging.

Enhanced shear strength and microstructure of Cu–Cu interconnection by low-temperature sintering of Cu nanoparticles

Mechanism of Ultrasonic-Assisted Sintering of Cu@Ag NPs Paste in air for High-Temperature Power Device Packaging

Rapid and Low Temperature Sintering Bonding Using Cu Nanoparticle Film for Power Electronic Packaging

Sintering Mechanism of Bimodal-Sized Cu Nanoparticle Paste for Power Electronics Packaging

Low temperature nanojoining of silver–copper nanopaste as die attach material for high temperature packaging

Low-temperature packaging through Ag-Cu supersaturated solid solution nanoparticle paste for high-temperature power electronics

Facile Synthesis of Cu-Sn Nanoparticle Film and Its Bonding Mechanism for Power Electronic Packaging

A Multilayer Paste Based on Ag Nanoparticles with Cu@Sn for Die Attachment in Power Device Packaging

Understanding the Sintering Mechanism of Cu@Ag Nanoparticles for Power Device Packaging

Superb Sinterability of the Cu Paste Consisting of Bimodal Size Distribution Cu Nanoparticles for Low-Temperature and Pressureless Sintering of Large-Area Die Attachment and the Sintering Mechanism

Preparation of Oxidation-Resistant Ag-Cu Alloy Nanoparticles by Polyol Method for Electronic Packaging

Review on Shear Strength and Reliability of Nanoparticle Sintered Joints for Power Electronics Packaging

Synthesis with Glucose Reduction Method and Low Temperature Sintering of Ag-Cu Alloy Nanoparticle Pastes for Electronic Packaging

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Molecular Dynamics Simulations on Mechanical Behaviors of Sintered Nanocopper in Power Electronics Packaging

Robust Cu–Cu Bonding with Multiscale Coralloid Nano-Cu3Sn Paste for High-Power Electronics Packaging