Abstract:Supported by the controlling of crush‐sinter conditions, the homogeneous hereto LCO‐cathodes can be prepared, concentrated particle sizes, uniform distribution of doped elements, and stable crystal structure can be obtained. Interestingly, through tailoring introduction of Li/Co anti‐sites, the regenerated LiCoO2 delivered a considerable capacity retention of 88.86% after 500 cycles at 5.0 C, bringing about fascinated electrochemical performance and structural stability. Captured by relatively low energy consumption and harmful gas‐emission, direct regeneration has captured numerous attention, but still suffers from different particle sizes and diverse doping hetero‐elements, hardly meeting the market demand. Herein, assisted by the crush‐sinter regeneration from element to grain further to particle, homogenized recovery of hetero spent LiCoO2 is successfully carried out. More interestingly, after tailoring Li/Co anti‐sites ratio, the redox activity of Co‐ions is remarkably enhanced, effectively inhibiting the irreversible escape of O‐atoms under high voltage, bringing about the fascinating electrochemical performance and structural stability. As anticipated, the regenerated LiCoO2 delivered a considerable capacity of 175.2 mAh g−1 at 1.0 C, whilst its capacity retention can remain at 88.86% even after 500 cycles at 5.0 C, better than that of commercial materials. Assembling regenerated materials versus. graphite pouch cell, their considerable practical capacity retention can be kept at ≈91.4% even after 500 cycles. Supported by in situ XRD, electronic structure analysis, and detailed DFT calculations, the excellent high voltage stability of optimized samples mainly comes from the alleviating of phase conversion and oxygen redox. This work is expected to shed light on the potential value of homogenized regenerations, and offer effective strategies of upcycling about spent LCO.

Recycling Spent LiCoO2 for Improved 4.6 V Performance

Directly-Regenerated LiCoO 2 with a Superb Cycling Stability at 4.6 V

Sustainable Recovery of LiCoO2 from Spent Lithium-Ion Batteries: Simplicity, Scalability, and Superior Electrochemical Performance

In Situ Constructed Spinel Layer Stabilized Upcycled LiCoO2 for High Performance Lithium‐Ion Batteries

Sustainable upcycling of spent LiCoO<sub>2</sub> to an ultra-stable battery cathode at high voltage

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Renovation of LiCoO2 with Outstanding Cycling Stability by Thermal Treatment with Li2CO3 from Spent Li-ion Batteries

Short-Process Regeneration of Highly Stable Spherical LiCoO2 Cathode Materials from Spent Lithium-Ion Batteries through Carbonate Precipitation

Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Direct Upcycling of Degraded LiCoO2 Material Toward High‐Performance Single‐Crystal NCM Cathode

Unravelling Li-ion Storage Capability of Cobalt Oxide Anode Recovered from Spent LiCoO2 Cathode via Carbothermal Reduction

Resolving the Structural Defects of Spent Li 1− x CoO 2 Particles to Directly Reconstruct High Voltage Performance Cathode for Lithium‐Ion Batteries

Homogenization and Upcycling of Hetero Spent LiCoO2 Cathodes: Rational Introduction of Li/Co Anti‐Sites Toward Enhanced High‐Voltage Stability

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Sustainable Upcycling of Spent LiCoO2 to an Ultra-Stable Battery Cathode at High Voltage

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Sustainable regenerating of high-voltage performance LiCoO2 from spent lithium-ion batteries by interface engineering

Direct recovery of LiCoO2 from the recycled lithium-ion batteries via structure restoration