Abstract:For high-precision machining, a convenient and accurate detection of motion error for machine tools is significant. Among common detection methods such as the ball-bar method, the laser tracker approach has received much more attention. As a high-accuracy measurement device, laser tracker is capable of long-distance and dynamic measurement, which increases much flexibility during the measurement process. However, existing methods are not so satisfactory in measurement cost, operability or applicability. Currently, a plausible method is called the single-station and time-sharing method, but it needs a large working area all around the machine tool thus leaving itself not suitable for the machine tools surrounded by a protective cover. In this paper, a novel and convenient positioning error measurement approach by utilizing a single laser tracker is proposed followed by two corresponding mathematical models including a laser tracker base point coordinate model and a target mirror coordinates model. Also, an auxiliary apparatus for target mirrors to be placed on is designed, for which sensitivity analysis and Monte-Carlo simulation are conducted to optimize the dimension. Based on the method proposed, a real experiment using single API TRACKER 3 assisted by the auxiliary apparatus is carried out and a verification experiment using a traditional RENISHAW XL-80 interferometer is conducted under the same condition for comparison. Both results demonstrate a great increase in the Y-axis positioning error of machine tool. Theoretical and experimental studies together verify the feasibility of this method which has a more convenient operation and wider application in various kinds of machine tools.

Real-Time Medical Tool Runout Monitor Based on Dual Laser Displacement Sensors

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Measurement Error Analysis and Accuracy Enhancement of 2D Vision System for Robotic Drilling

Error Separation Method For Precision Measurement Of The Run-Out Of A Microdrill Bit By Using A Laser Scan Micrometer Measurement System

Real-time Measuring Method to Measure the Micro-Displacement of a Rotating Cutter in Precise Piston Noncylinder Pinhole Boring

Development of a Monocular Vision System for Robotic Drilling.

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Real-time 3D Tracking of Articulated Tools for Robotic Surgery

Development of electrical runout online measurement system based on eddy current technique and laser triangulation

Dynamic cutter runout measurement with laser sensor

A force-sensing surgical drill for real-time force feedback in robotic mastoidectomy

Vision-Based Real-Time Tracking of Surgical Instruments in Robot-Assisted Laparoscopic Surgery

Optimization of Laser Trackers Locations for Position Measurement

Laser Tracker-Based on-the-Fly Machine Tool Calibration without Real-Time Synchronization

On the accuracy of a video-based drill-guidance solution for orthopedic and trauma surgery: preliminary results

Error Analysis of Normal Surface Measurements Based on Multiple Laser Displacement Sensors

Robust Surgical Tool Tracking with Pixel-based Probabilities for Projected Geometric Primitives

Indirect Measurement of Machine Tool Motion Axis Error with Single Laser Tracker

Calibration and Registration of a Freehand Video-Guided Surgical Drill for Orthopaedic Trauma

Force-Position Hybrid Compensation Control for Path Deviation in Robot-Assisted Bone Drilling

A Real-Time Tool Positioning Sensor for Machine-Tools