Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Synthesis and Performances of Poly(3,4-ethylenedioxythiophene) Aqueous Dispersions with a High Solid Content and Low Viscosity

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Electrical Conductivity, Thermo-Mechanical Properties, and Cytotoxicity of Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) (PEDOT:PSS)/Sulfonated Polyurethane Blends

Modification of PEDOT:PSS thin film properties using pyridine-based solid additive for optoelectronic applications

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Conductivity Enhancement of PEDOT:PSS via Addition of Chloroplatinic Acid and Its Mechanism

Vertical and horizontal patterned media writing

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Improved Alignment of PEDOT:PSS Induced by in-situ Crystallization of "Green" Dimethylsulfone Molecules to Enhance the Polymer Thermoelectric Performance

One-step Fabrication of Conductive Poly(3,4-Ethylenedioxythiophene) Hollow Spheres in the Presence of Poly(vinylpyrrolidone)

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Solid-State Synthesis of a Conducting Polythiophene Via an Unprecedented Heterocyclic Coupling Reaction

A PEDOT based graft copolymer with enhanced electronic stability

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations

Ultrahigh-Conductivity Polymer Hydrogels with Arbitrary Structures.

Fine‐Tuning Conformation of PEDOT Chains Enables Simultaneously Enhanced Conductivity, Work Function, Transmittance, and Waterproofness in PEDOT:PSS Interlayer for Highly Efficient and Stable Organic Photovoltaics

Feasible Modification of PEDOT:PSS by Poly(4-styrenesulfonic Acid): A Universal Method to Double the Efficiencies for Solution-Processed Organic Light-Emitting Devices.

Temperature control of a batch reactor by the refluxing reaction technique with action on the pressure

Remodeling the estrogen receptor model

Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonic Acid) (PEDOT:PSS) Conductivity Enhancement through Addition of Imidazolium-Ionic Liquid Derivatives

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology