Abstract:The CsPbIBr2 perovskite films deposited from the precursor solutions in air, usually suffer poor surface coverage and air-stability due to the uncontrolled nucleation and the existence of I– during the film formation, resulting in terrible photoelectric characteristics and reproducibility. At present, the high-quality CsPbIBr2 films are prepared under nitrogen atmosphere, which results in the increase of the cost and thus impedes their applications in air. Here in this work, we propose a strategy for growing the perovskite films with low defect density and better stability in air via dual-ligand-assisted (ligand 1 (LP) and ligand 2 (NH4SCN)) solution strategy. These ligands contain some organic molecules which have strong interaction with ions on the surface of perovskite thin film in order to regulate the addition of precursor ions onto the films. The high-quality CsPbIBr2 thin films are prepared in air with relative humidity of ≤60% by the spraying method. The results indicate that ligand 1 with hydrophilic group and hydrophobic group, a kind of surfactant, can effectively reduce the surface tension of perovskite precursor solution, improve the coverage of CsPbIBr2 perovskite film, and form a block layer of water and oxygen. However, the addition of ligand 1 in precursor solution inevitably introduces many grain boundaries, which is unfavorable for carrier transport and collection. Thus, ligand 2 is employed to control the nucleation of perovskite film as another ligand, resulting in reducing the point defect formation. Their combination is beneficial to forming the uniform perovskite film with large-size crystal and low-density defect. The high-quality crystallization of the perovskite film is found to simultaneously enhance the response and the durability of photodetectors. Thus, the unpackaged photodetectors (ITO/CsPbIBr2/Au) based on this strategy yield the outstanding photoelectric response under the excitation of 405 nm laser. This device exhibits a low dark current density of 2 × 10–4 mA/cm2, a fast response time of 20–21 µs, and high stability (81%, ≥70 d) in air with a relative humidity of 40%–60%. Hence, this study provides a simple method to prepare high-quality CsPbIBr2 perovskite thin films with low-density defect and realize air-stable and charge-transport-layer-free CsPbIBr2 photodetectors for practical applications in photoelectric detection field.

Filterless Near-Infrared Narrowband Photodetectors Based on Mixed Metal Perovskite Single Crystals

Rational Composition Engineering for High-Quality Pb-Sn Photodetector Toward Sensitive Near-Infrared Digital Imaging Arrays

Double‐Side Crystallization Tuning to Achieve over 1 Μm Thick and Well‐Aligned Block‐Like Narrow‐Bandgap Perovskites for High‐Efficiency Near‐Infrared Photodetectors

The UV–vis‐NIR Broadband Ultrafast Flexible Sn‐Pb Perovskite Photodetector for Multispectral Imaging to Distinguish Substance and Foreign‐Body in Biological Tissues

Achieving High-Quality Sn-Pb Perovskite Films on Complementary Metal-Oxide-Semiconductor-Compatible Metal/Silicon Substrates for Efficient Imaging Array.

Self‐Driven Perovskite Narrowband Photodetectors with Tunable Spectral Responses

Controllable growth of centimeter-size 2D perovskite heterostructural single crystals for highly narrow dual-band photodetectors

Centimeter-Sized Stable Zero-Dimensional Cs3Bi2I9 Single Crystal for Mid-Infrared Lead-Free Perovskite Photodetector

High-Performance Planar Self-Driven Visible and Near-Infrared Photodetector Based on Pb-Sn Perovskite Single Crystals

Stable and sensitive tin-lead perovskite photodetectors enabled by azobenzene derivative for near-infrared acousto-optic conversion communications

Postripening Fabrication and Self‐Driven Narrowband Photoresponse of Large‐Grain, Phase‐Pure CsPbBr3 Films

Ultraviolet-Visible-Near-Infrared Broadband Photodetector Enabled by Cs2AgBiBr6: Sn/Conjugated Polymer Heterojunction

Quasi‐single‐crystal Tin Halide Perovskite Films with High Structural Integrity for Near‐infrared Imaging Array enabling Hidden Object Recognition

High-Performance Near-Infrared Photodetectors Based on the Synergy Effect of Short Wavelength Light Filter and Long Wavelength Response of a Perovskite/Polymer Hybrid Structure

Narrow Bandgap Pb‐Sn Perovskite/InGaZnO Hybrid Phototransistor for Near‐Infrared Detection

Dual Organic Spacer Cation Quasi‐2D Sn–Pb Perovskite for Solar Cells and Near‐Infrared Photodetectors Application

Controllable Growth of Centimeter-Sized 2D Perovskite Heterostructures for Highly Narrow Dual-Band Photodetectors

Sn‐Based Self‐Powered Ultrafast Perovskite Photodetectors with Highly Crystalline Order for Flexible Imaging Applications

Air-stable CsPbIBr2 Photodetector Via Dual-Ligand-assisted Solution Strategy

Thin MAPb0.5Sn0.5I3 Perovskite Single Crystals for Sensitive Infrared Light Detection

Highly Narrowband Perovskite Single-Crystal Photodetectors Enabled by Surface-Charge Recombination