Abstract:Electroreduction of CO2 is one of the most promising CO2 conversion pathways because of its moderate reaction conditions, controllable product composition, and environment-friendliness. However, most of the current CO2 electroreduction technologies have not reached the techno-economic threshold for a competitively profitable electrochemical process. Based on a simple two-electron transfer process, the electroreduction of CO2 to CO, which is further processed into syngas with the reduction of H2O to H-2, is postulated to be the most promising pathway for a profitable electrochemical process. Such a process urgently requires nonprecious electrocatalysts that can precisely control the CO/H-2 ratio. Herein, we present a tailored synthesis of bifunctional electrocatalysts with high activity, which can realize the preparation of syngas with controlled compositions via molecular engineering of a ternary nanocomposite. Specifically, a mixture of melamine, triphenylphosphine, and nickel acetate was milled and dissolved in ethanol; the ternary nanocomposite was obtained after rotary evaporation of the mixture. We prepared the catalysts by pyrolyzing the obtained composites at 850 degrees C for 2 h. The synthesis strategy was facile and easy to scale. The specific surface area and pore volume of the bifunctional electrocatalyst were both significantly enhanced upon increasing the concentration of the phosphorus source, triphenylphosphine, during the precursor preparation. The obtained bifunctional electrocatalysts had hierarchically porous structures, which had well-dispersed active sites and could promote mass transport. Raman spectra revealed higher degrees of disorder with higher P/Ni ratios in the precursor. X-ray photoelectron spectroscopy verified the presence of Ni-P-x and Ni-N-x functionalities, which were the active sites for hydrogen evolution and CO2 reduction, respectively. Hence, the electrocatalytic performance of this series of bifunctional electrocatalysts can be tuned from CO-dominant to H-2-dominant. The electrochemical performance was evaluated using a CO2-saturated 0.5 mol.L-1 KHCO3 aqueous solution at ambient temperature by linear sweep voltammetry and potentiostatic electrolysis. Through these experiments, we determined that the activity of the catalysts was influenced by the surface phosphorus/Ni-N-x site ratio. The highest CO faradaic efficiency (91%) was achieved at -0.8 V (versus a reversible hydrogen electrode, RHE) with Ni-N-C in the absence of Ni-P. The CO/H-2 molar ratio in the syngas stream was tunable from 2 : 5 to 10 : 1 in the potential range from -0.7 to -1.1 V (vs RHE) with a total faradic efficiency of 100%. The syngas composition directly links to the molar ratio of the two integrated components, nickel phosphide and Ni-N-C. Additionally, the stability of the optimized bifunctional electrocatalyst at -0.7 V for 8 h was tested, in which the CO/H-2 ratio was maintained between 1.2 and 1.3, indicating excellent stability. This study provides a new perspective for the engineering of bifunctional electrocatalysts for the conversion of abundant CO2 and water into syngas with tailorable CO/H-2 ratios.

Heterobimetallic Praseodymium-Nickel Active Sites with Pr-N4C2 4 C 2 and Ni-N4 4 Moieties Enabling Synergistic Catalysis of CO2 2 Electroreduction

Heterobimetallic Praseodymium-Nickel Active Sites with Pr-N4C2 and Ni-N4 Moieties Enabling Synergistic Catalysis of CO2 Electroreduction

Precisely Tailoring the First Coordination Shell of Metal Centers in Porous Nitrogen-Doped Carbon Promoting Electroreduction of CO2 under Neutral Condition

Isolated Diatomic Ni‐Fe Metal–Nitrogen Sites for Synergistic Electroreduction of CO2

Atomically Dispersed Nickel-Bismuth Dual-Atom Sites for High Rate Electrochemical CO2 Reduction

Mechanistic Insight into the Synergy Between Nickel Single Atoms and Nanoparticles on N-doped Carbon for Electroreduction of CO2

Advanced Ni-Nx-C Single-Site Catalysts for CO2 Electroreduction to CO Based on Hierarchical Carbon Nanocages and S-doping

Proximity Electronic Effect of Ni/Co Diatomic Sites for Synergistic Promotion of Electrocatalytic Oxygen Reduction and Hydrogen Evolution

Rational design of asymmetric atomic Ni-P1N3 active sites for promoting electrochemical CO2 reduction

Enhancing CO2 Reduction Efficiency with Axial Oxygen Coordinated Ni-N4 Active Sites on Hierarchical Pore N-doped Carbon

Achieving Efficient CO2 Electrolysis to CO by Local Coordination Manipulation of Nickel Single-Atom Catalysts.

Synergistic electronic structure modulation in single-atomic Ni sites dispersed on Ni nanoparticles encapsulated in N-rich carbon nanotubes synthesized at low temperature for efficient CO 2 electrolysis

Diminishing the Uncoordinated N Species in Co-N-C Catalysts Toward Highly Efficient Electrochemical CO2 Reduction

Engineering of Bifunctional Nickel Phosphide@Ni-N-C Catalysts for Selective Electroreduction of CO2-H2O to Syngas

Modulating Electron Density of Ni-N-C Sites by N-doped Ni for Industrial-level CO2 Electroreduction in Acidic Media

Optimizing Electron Densities of Ni-N-C Complexes by Hybrid Coordination for Efficient Electrocatalytic CO<sub>2</sub> Reduction

Insight into atomically dispersed porous M-N-C single-site catalysts for electrochemical CO2 reduction

Asymmetric dinitrogen-coordinated nickel single-atomic sites for efficient CO2 electroreduction

Nitrogen-rich carbon nitride inducing electron delocalization of Co-N 4 site to enhance electrocatalytic carbon dioxide reduction

Tunable Cobalt-Polypyridyl Catalysts Supported on Metal-Organic Layers for Electrochemical CO2 Reduction at Low Overpotentials.

Atomically Dispersed Dual‐Metal Site Catalysts for Enhanced CO2 Reduction: Mechanistic Insight into Active Site Structures