Abstract:Introduction . Blood pressure (BP) has been a potential risk factor for cardiovascular diseases. BP measurement is one of the most useful parameters for early diagnosis, prevention, and treatment of cardiovascular diseases. At present, BP measurement mainly relies on cuff-based techniques that cause inconvenience and discomfort to users. Although some of the present prototype cuffless BP measurement techniques are able to reach overall acceptable accuracies, they require an electrocardiogram (ECG) and a photoplethysmograph (PPG) that make them unsuitable for true wearable applications. Therefore, developing a single PPG-based cuffless BP estimation algorithm with enough accuracy would be clinically and practically useful. Methods . The University of Queensland vital sign dataset (online database) was accessed to extract raw PPG signals and its corresponding reference BPs (systolic BP and diastolic BP). The online database consisted of PPG waveforms of 32 cases from whom 8133 (good quality) signal segments (5 s for each) were extracted, preprocessed, and normalised in both width and amplitude. Three most significant pulse features (pulse area, pulse rising time, and width 25%) with their corresponding reference BPs were used to train and test three machine learning algorithms (regression tree, multiple linear regression (MLR), and support vector machine (SVM)). A 10-fold cross-validation was applied to obtain overall BP estimation accuracy, separately for the three machine learning algorithms. Their estimation accuracies were further analysed separately for three clinical BP categories (normotensive, hypertensive, and hypotensive). Finally, they were compared with the ISO standard for noninvasive BP device validation (average difference no greater than 5 mmHg and SD no greater than 8 mmHg). Results . In terms of overall estimation accuracy, the regression tree achieved the best overall accuracy for SBP (mean and SD of difference: −0.1 ± 6.5 mmHg) and DBP (mean and SD of difference: −0.6 ± 5.2 mmHg). MLR and SVM achieved the overall mean difference less than 5 mmHg for both SBP and DBP, but their SD of difference was >8 mmHg. Regarding the estimation accuracy in each BP categories, only the regression tree achieved acceptable ISO standard for SBP (−1.1 ± 5.7 mmHg) and DBP (−0.03 ± 5.6 mmHg) in the normotensive category. MLR and SVM did not achieve acceptable accuracies in any BP categories. Conclusion . This study developed and compared three machine learning algorithms to estimate BPs using PPG only and revealed that the regression tree algorithm was the best approach with overall acceptable accuracy to ISO standard for BP device validation. Furthermore, this study demonstrated that the regression tree algorithm achieved acceptable measurement accuracy only in the normotensive category, suggesting that future algorithm development for BP estimation should be more specific for different BP categories.

UNCERTAINTY QUANTIFICATION OF WEARABLE CUFFLESS BLOOD PRESSURE MEASUREMENT

Bayesian Model Averaging for Improving the Accuracy of Cuffless Blood Pressure Estimation

Study of cuffless blood pressure estimation method based on multiple physiological parameters

Scenario Adaptive Cuffless Blood Pressure Estimation by Integrating Cardiovascular Coupling Effects

Beats-to-Beats Estimation of Blood Pressure During Supine Cycling Exercise Using a Probabilistic Nonparametric Method

Uncertainty quantification of cuffless blood pressure estimation based on parameterized model evidential ensemble learning

Blood Pressure Estimation Using Photoplethysmography Only: Comparison between Different Machine Learning Approaches

A New Modeling Methodology for Continuous Cuffless Blood Pressure Measurement

Cuffless Blood-Pressure Estimation Method Using A Heart-Rate Variability-Derived Parameter

Cuffless Blood Pressure Measurement using Smartwatches: A Large-scale Validation Study

Pulse Transit Time Based Continuous Cuffless Blood Pressure Estimation: A New Extension and A Comprehensive Evaluation

A Novel Model for Continuous Cuff-less Blood Pressure Estimation.

Cuff-less blood pressure estimation from photoplethysmography signal and electrocardiogram

Robust Feature Selection for BP Estimation in Multiple Populations: Towards Cuffless Ambulatory BP Monitoring

Abstract 17703: Sequential Validation of a Cuffless Photoplethysmography-Based Wristband for Blood Pressure Measurement: Algorithm Building to Regulatory Standard Trial

Novel Blood Pressure Estimation Method Using Single Photoplethysmography Feature

Central Blood Pressure Estimation From Distal PPG Measurement Using Semiclassical Signal Analysis Features

Cuffless and Touchless Measurement of Blood Pressure from Ballistocardiogram Based on a Body Weight Scale

Continuous Cuffless Blood Pressure Estimation Using Pulse Transit Time and Photoplethysmogram Intensity Ratio.

Cuffless Blood Pressure Estimation Using Calibrated Cardiovascular Dynamics in the Photoplethysmogram

BP-Diff: a conditional diffusion model for cuffless continuous BP waveform estimation using U-Net