Abstract:In this study, microchannel heat sinks with symmetric and parallel wavy microchannels are studied in a wide range of Reynolds numbers from 50 to 700 via a three-dimensional fluid-solid conjugate model. The results show that the symmetric configuration yields higher Nusselt numbers than the parallel one, and it is especially true at higher Reynolds numbers and larger amplitude-to-wavelength ratios. The heat transfer enhancement can be attributed to the fact that the symmetric configuration induces four Dean vortices in the cross sections perpendicular to the flow path, whereas there are only two Dean vortices in the parallel configuration, leading to stronger coolant mixing and hence the higher Nusselt numbers in the symmetric configuration. However, because of the presence of channel throats, the symmetric configuration also achieves a significantly high pressure penalty. As a result, the overall performance of the symmetric configuration is slightly lower than that of the parallel configuration. To enhance the performance of wavy microchannel heat sinks, modified symmetric and parallel wavy configurations are proposed, in which several transverse gaps are added into ribs to connect adjacent microchannels. The results demonstrate that such a secondary branch design significantly enhances Nusselt numbers for both the parallel wavy configurations owing to the enhanced fluid mixing between adjacent microchannels. Moreover, it is found that, as compared with its original wavy configurations, secondary branches slightly increase the pressure drop across the modified parallel configuration. Thus, the overall performances are markedly enhanced for the modified parallel configurations. As expected, secondary branches greatly reduce the pressure drop across the modified symmetric configuration. Beyond expectation, the suction effect of channel throats due to secondary branches can weaken the Dean vortices in the valley vs valley regions and worsen the heat transfer performance, especially for the heat sink with larger Re and amplitude-to-wavelength ratios. As a result, the modified symmetric wavy configurations are suggested to employ with a wider gap and small amplitude-to-wavelength ratio. Generally speaking, the modified parallel wavy configuration is more dominant than the symmetric one.

Study on the Performance of Wavy Microchannel Heat Sink with Staggered Inlets and Outlets

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Numerical study on flow and heat transfer in a novel symmetric sinusoidal wavy microchannel heat sink with rectangular rib prisms

Numerical study on hydrothermal performance in a microchannel with gradient array of ribs and pin fins

Optimization of heat dissipation in novel design wavy channel heat sinks for better performance

Numerical study of different micro-channel structures on fluid flow and heat transfer performance

Heat transfer enhancement of symmetric and parallel wavy microchannel heat sinks with secondary branch design

Experimental study of flow boiling in microchannel heat sink enhanced with partially in-line pin fins fence arrangement

Numerical analysis on thermal-hydraulic performance of optimized microchannel heat sink with slant ribs and quatrefoil rib-elliptical groove complex structures

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids

Study on the efficient heat transfer mechanism of microchannel pin-fin arrays under low pumping power

High performance heat sink with counter flow diverging microchannels

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

Experimental study of embedded manifold staggered pin-fin microchannel heat sink

Heat transfer enhancement of staggered water-droplet grooved microchannel heat sink using Al2O3 nanofluid

Numerical Analysis of Flow Boiling Characteristics of a Single Channel Heat Sink Subjected to Multiple Heat Sources

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

Thermohydraulic performance of the microchannel heat sinks with three types of double-layered staggered grooves