Abstract:The multicore fiber (MCF) shape sensing technology utilizes the strain distribution characteristics of each core to achieve the three-dimensional shape reconstruction of the fiber. However, when using distributed fiber-optic sensing technology to measure the strain of all cores, the strain distributions are measured in different time slots resorting an optical switch, leading to difficulties in synchronizing the strain distributions within the MCF and shape changes. This, in turn, affects the accuracy of shape reconstruction. To address this, we propose a multicore fiber shape sensing method based on optical frequency domain reflectometry parallel measurements that can simultaneously measure the strain of multiple cores with only one measurement. First, we use two-outer-core parallel measurements to achieve fiber three-dimensional shape reconstruction based on vector projections method. This can achieve a maximum relative error of 3.37% for shape reconstruction. Dynamic shape sensing experiments demonstrated the advantage of the proposed method in reconstructing instantaneous shapes of the MCF. Furthermore, by connecting the two outer cores and the central core in parallel, we achieve simultaneous measurement of shape and temperature, effectively reducing the impact of temperature changes on shape sensing. When the temperature increases from 40°C to 90°C, the maximum relative error of the three-core parallel measurements for shape reconstruction is 5.1%. The proposed method can improve the sensing accuracy in applications with rapidly changing fiber shapes and make the entire sensing system more compact.

Differentiated Focal Plane Assisted Multi-core Fiber Fusion Splice Loss Evaluation

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Experimental Study and Analysis of High Sensitivity Interferometric Fiber Optic Gyroscope Using Multi-Core Fiber

Low-loss fusion splicing between spacing-mismatched multicore fibers

Fusion Splicing Photonic Crystal Fibers and Conventional Single-Mode Fibers: Microhole Collapse Effect

Efficiency and Beam Quality Deterioration in Double-Cladding Fiber Amplifiers Induced by Core Misalignment of Fusion Splices

Low Loss Splicing Experiment of High Nonlinearity Photonic Crystal Fiber and Single Mode Fiber

An efficient evaluation model of fusion splice with different transverse offset and angular misalignment for few mode fiber

More than threefold expansion of highly nonlinear photonic crystal fiber cores for low-loss fusion splicing.

Ultralow-Loss Fusion Splicing Between Negative Curvature Hollow-Core Fibers And Conventional Smfs With A Reverse-Tapering Method

Design and Optimization of Multi-core Fibers with Low Crosstalk and Large Effective Area

Splicing Hollow-Core Fiber with Standard Glass-Core Fiber with Ultralow Back-Reflection and Low Coupling Loss

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Ultralow-loss Fusion Splicing Between Antiresonant Hollow-Core Fibers and Antireflection-Coated Single-Mode Fibers with Low Return Loss

Weakly-coupled 7-core-2-LP-mode transmission using commercial SFP + transceivers enabled by all-fiber spatial multiplexer and demultiplexer.

Low-Loss All-Fiber Mode Multiplexers for Weakly-Coupled 4-Mode Fiber

Multimode and Single-Mode Fiber Compatible Graded-Index Multicore Fiber for High Density Optical Interconnect Application

Design of 125-Μm Cladding Diameter Multicore Fibers with High Core Multiplexing Factor for Wideband Optical Transmission

Multicore fiber shape sensing based on optical frequency domain reflectometry parallel measurements

Spacing-Tailored Multicore Fiber Interface for Efficient FIFO Devices

Robust Mode Matching between Structurally Dissimilar Optical Fiber Waveguides