Abstract:Fischer-Tropsch synthesis is an important way to replace crude oil resources to sustainable energy in the future, and an important process for catalytic conversion of syngas into clean fuel and high value-added chemicals. Iron-based catalysts have been widely used in industrial production due to their advantages of low cost, flexible operation and water-gas conversion activity. However, the phase change of iron-based catalysts during the reaction process is very complex. As many as seven iron species including elemental iron and different types of iron oxide iron carbide are considered to have Fischer-Tropsch synthesis activity. It is very important to understand the evolution of iron species and their roles in the reaction for clarifying the structure-activity relationship of catalysts and designing efficient industrial catalysts. Hematite Fe 3 O 4 is often used as the precursor oxide of iron based catalyst, which is converted into iron carbide during the reaction process. It is often considered as an inactivated phase and has high water-gas conversion activity, leading to high CO 2 selectivity. Wang et al prepared Fe 3 O 4 catalyst by using metal organic framework（MOF） as precursor, which would be converted into Fe 3 O 4 @Fe 5 C 2 during the reaction process. Therefore, the author believed that Fe 5 C 2 phase was the key to the catalyst activity. Herein, We used graphene as the support and used the classic preparation method of supported catalyst-impregnation method to prepare iron-based catalyst with different loading capacity. The Fe 3 O 4 particles were grown by calcinating at high temperature to prevent excessive carbonization in the reaction process, and the properties of Fe 3 O 4 phase were investigated. The results of reaction performance test show that Fe 3 O 4 species itself has a certain activity of CO hydrogenation, and the carbonization process of large Fe 3 O 4 particles（＞200 nm） in the reaction process will be inhibited to a certain extent. With the increase of reaction time, part of Fe 3 O 4 is carbonized into iron carbide, and the catalyst activity increases, indicating that the activity of iron carbide species is higher than that of Fe 3 O 4 .

On the mechanism of the Fischer-Tropsch synthesis involving unreduced iron catalyst

Fischer–Tropsch Synthesis: Reaction mechanisms for iron catalysts

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Spectroscopic and Transient Kinetic Studies of Site Requirements in Iron-Catalyzed Fischer−Tropsch Synthesis

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Preparation of Graphene-Supported Fe3O4 Model Catalysts for Fischer-Tropsch Synthesis

Surface Coordinate Geometry of Iron Catalysts: Hydrogenation of CO2 over Fe/TiO2 Prepared by a Novel Method

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Identification of carbon species on iron-based catalysts during Fischer-Tropsch synthesis

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

Nanocrystalline Ferrihydrite-Based Catalysts for Fischer-Tropsch Synthesis: Part I. Reduction and Carburization Behavior

Revealing the activity of different iron carbides for Fischer-Tropsch synthesis

Preparation and Catalysis of Carbon‐Supported Iron Catalysts for Fischer–Tropsch Synthesis

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Atomically Defined Iron Carbide Surface for Fischer–Tropsch Synthesis Catalysis

Efficient Fischer-Tropsch to light olefins over iron-based catalyst with low methane selectivity and high olefin/paraffin ratio

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Selectivity control between reverse water-gas shift and fischer-tropsch synthesis in carbon-supported iron-based catalysts for CO 2 hydrogenation

Highly Active and Stable Carbon Nanosheets Supported Iron Oxide for Fischer‐Tropsch to Olefins Synthesis