Abstract:Bridges, being vital structural components in infrastructure with a substantial stock, are confronted with severe service conditions and serious issues of deterioration. An urgent demand exists for the application of inspection methods that are rapid, automated, and require minimal manpower to achieve a comprehensive detection of bridge damages. The present study proposes a non-destructive damage detection framework for multiple damages of 1D beam bridges and 2D slab bridges based on data-driven method from in-house finite element programing. Through finite element calculations of the displacement time history data at the vehicle-bridge contact point when a vehicle passes over a bridge simulated with multiple damage conditions, which is also the Apparent Profile (AP) data, the difference between APs when a vehicle passes over a bridge in damaged and intact state can be calculated to obtain Contact Point Displacement Variations (CPDVs). Then, Multiple damage conditions will serve as the outputs and CPDV (Contact Point Displacement Variation) under different damage conditions will severe as inputs of BP (Back Propagation) neural network. The architecture of BP neural network is then adjusted to fit the mapping relationship between CPDVs and damage parameters. Subsequently, random damages are introduced within the bridge structure. By collecting the vehicle’s acceleration time series data as it passes over the damaged bridge, AP can be calculated using only the vehicle dynamics model. Further, CPDV can be derived and used as input into a Backpropagation (BP) neural network for bridge damage detection. Finally, a scaled model experiment was carried out to verify the validity and robustness of the framework. The results revealed that the proposed method can predict bridge damages precisely and robustly, even for damages located near bridge supports of minor extent. The proposed method addresses the limitations of prior research by enhancing the detection of slab bridge damages and precisely mapping local bridge damage information. It is applicable for routine condition assessments of medium and small span bridges, providing detailed information on the location and severity of localized damages.

Finite Element–based Data-Driven Method to Detect Multiple Damages of 1D Beam Model and 2D Slab Model of Bridges-a Theoretical and Experimental Study

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Multidamage Detection of Breathing Cracks in Plate‐Like Bridges: Experimental and Numerical Study

Research on Methods of Damage Diagnosis Based on Bridges with Dynamic Characteristics

Bridge Damage Localization Through Response Reconstruction with Multiple BP-ANNs under Vehicular Loading

Damage Detection in Bridges under Moving Loads Based on Subspace Projection Residuals

Effective LiDAR Damage Detection:Comparing Two Detection Algorithms

Bridge Condition Monitoring under Moving Loads Using Two Sensor Measurements

Neural Networks-Based Damage Detection for Bridges Considering Errors in Baseline Finite Element Models

Effect Of Typical Damages On Vehicle-Induced Dynamic Response Of Simply Supported Multi-Slab Girder Bridges

A Structural Damage Detection Approach Based On Response Sensitivity For Bridges Subjected To Moving Vehicles

Damage Detection of Continuous Beam Bridge Based on Maximum Successful Approximation Approach of Wavelet Coefficients of Vehicle Response

Identification of a bridge's structural damage and vehicular parameters based on dynamic response sensitivity analysis

Strain-Based Damage-Assessment Method for Bridges under Moving Vehicular Loads Using Long-Gauge Strain Sensing

Multi-scale finite element model updating of highway bridge based on long-gauge strain response

Multidamage Detection of Bridges Using Rough Set Theory and Naive-Bayes Classifier

Bearing Damage Detection of a Bridge under the Uncertain Conditions Based on the Bayesian Framework and Matrix Perturbation Method

Bridge Damage Localization Using Axle Weight Time History Data Obtained Through a Bridge Weigh-in-Motion System

Automated, strain-based, output-only bridge damage detection

Damage Detection of Beam Bridge under a Moving Load Using Auto-encoder

Structural Damage Assessment with Combined Data of Static and Modal Tests of Bridge