Abstract:This paper presents a decoupled dead-time compensation method for voltage source inverters in permanent magnet synchronous machine (PMSM) drives. In the proportional-integral-resonant (PIR)-based compensation scheme, the performances of the current control loop and dead-time compensation are coupled. Hence, effective compensation of the dead-time effect is yield with the expense of distorted current step response, where significant overshoot and oscillation are introduced. Besides, the extended-state observer (ESO)-based scheme suffers from poor compensation capability due to limited tracking bandwidth. To increase the tracking bandwidth, the quasi-resonant-controller (QRC)-based disturbance observer was proposed. However, such observer suffers from the problem of system instability. To address above issues, a revised-resonant control-based disturbance observer is proposed in this paper, which could fully decouple the performances of the current control loop and dead-time compensation. Compared with the PIR, the proposed scheme could donate superior compensation capability without introducing overshoot and oscillation in the current step response. Compared with the ESO, the proposed scheme could increase tracking bandwidth and thus donate superior compensation capability. Compared with the QRC-based observer, the proposed scheme could guarantee system stability. Detailed analysis of system stability and compensation capability is presented. Finally, the proposed scheme is experimentally validated on a 0.55kW PMSM platform.

Decoupled Dead-Time Compensation Method Using Revised-Resonant Control-Based Disturbance Observer in PMSM Drives

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

An Adaptive Speed Control Method for Permanent Magnet Synchronous Motors

Speed Control For A Permanent Magnet Synchronous Motor With An Adaptive Self-Tuning Uncertainties Observer

High Dynamic Sensorless Control for PMSMs Based on Decoupling Adaptive Observer

Deadbeat Predictive Speed Control of PMSM Via Enhanced Low-gain Disturbance Observer Design and Inertia Identification

Modified Deadbeat Predictive Current Control for PMSM Drive System Via a Composite Integral Sliding Mode Observer

Repetitive Control-Based Extended State Observer for Current Fluctuation Suppression of PMSM Drives

Improved Deadbeat Predictive Current Control With Embedded Resonant Polynomial and Disturbance Observer for PMSM Current Distortion Rejection

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Integral Sliding Mode Control Based Deadbeat Predictive Current Control for PMSM Drives With Disturbance Rejection

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Smooth and Robust Current Control of PMSMs with Decoupling-Type Extended State Observers

An Enhanced Deadbeat Predictive Current Control of SPMSM with Linear Disturbance Observer

Static-Errorless Deadbeat Predictive Current Control for PMSM Current Harmonics Suppression Based on Vector Resonant Controller

Improved Non-Singular Fast Terminal Sliding Mode Control With Disturbance Observer for PMSM Drives

Dead-Time Compensation Based on a Modified Multiple Complex Coefficient Filter for Permanent Magnet Synchronous Machine Drives

Direct-axis Dead-time Effect Compensation Strategy Based on Adaptive Linear Neuron Method for PMSM Drives

An Enhanced Deadbeat Model Predictive Flux Control for PMSMs with A Reduced Order Disturbance Observer

Improved Deadbeat Predictive Current Control of PMSM Based on a Resistance Adaptive Position Observer

Enhanced Deadbeat Predictive Current Control for SPMSM Drives Combining Robust Super-Twisting Terminal Sliding Mode Speed Controller