Abstract:Highlights • Bandgap tuning of TiO 2 by CuO nanoparticles for improved photocatalytic activity. • Photocatalytic mechanism confirmed by the major contributions of h + and e − agents. • Under UV + PMS conditions, photocatalytic efficiency reaches the highest at 90%. • Membrane antifouling ability showed an FRR of 98.8% and lower surface roughness. • Membrane hydrophilization by O 2 plasma and PAA layer showed enhanced pure water flux. Background One direction to mitigate membrane fouling is to create anti-fouling photocatalytic membranes. The photocatalysts' hydrophilicity reduces the interaction of the membrane with hydrophobic foulants and the photocatalysis decomposes membrane fouling. Another noteworthy point is that PMS (peroxymonosulfate) can be activated by photocatalysts to decompose foulants and membrane fouling more intensely. Methods The CuO/TiO 2 was prepared by deposition of Cu(OH) 2 onto TiO 2 followed by heat treatments. Their catalytic performances were tested by the degradation of Acid Blue 260 by photocatalysis and PMS activation. The best CuO/TiO 2 was then coated onto PVDF membranes through a PAA binding layer. Their antifouling performance was examined through simulated foulants such as sodium alginate. The photocatalysts and membranes were characterized using FTIR, SEM-EDS, TEM, XRD, BET, UV–Vis DRS, XPS, ESR, and AFM. Significant Findings The CuO/TiO 2 possessed a lower bandgap, high surface area (60.7 m 2 /g), and low particle sizes (30–60 nm). The 25%CuO/TiO 2 possesses the highest photocatalytic degradation efficiency of 39.0% under UV irradiation; further PMS activation caused the removal efficiency to reach 90.0%. The degradation efficiency by the membrane was 100% after five cycles. The membranes indicated a decrease of 18.9% in water flux but remained very high. The membrane flux recovery ratio (FRR) was 98.8%. Graphical abstract Download : Download high-res image (212KB) Download : Download full-size image

CuO-Fe3C-C Modified PVDF Membrane for Catalysis and Antifouling

CuFeS2/MXene-Modified Polyvinylidene Fluoride Membrane for Antibiotics Removal Through Peroxymonosulfate Activation

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Preparation of Catalytic Ceramic Nanofiber Membranes with MnFe Dual-Active Sites Enhancing Catalytic Ozonation of Sulfamethoxazole

Fabrication of PVDF membrane loaded with ultra-thin g-C 3 N 4 /FeOCl nanomaterials and study on catalytic and antifouling properties

Photocatalysis and PMS activation caused by CuO/TiO 2 photocatalyst coated on PVDF membrane for mitigating membrane fouling

Nanoarchitectonics of CuO/α-Fe2O3/BiVO4 Photocatalysts with Double Heterojunctions on PVDF Membranes: Investigating Sulfadiazine Removal and Antifouling Properties

An Anchored Fe-Cu LDH onto a Polyvinylidene Fluoride Membrane with Strong Peroxymonosulfate Activation-Induced Degradation of Methylene Blue and Self-Cleaning Property of Oil/Water Separation

Modified Polyethersulfone Ultrafiltration Membrane for Enhanced Antifouling Capacity and Dye Catalytic Degradation Efficiency

Fe3O4/PVDF catalytic membrane treatment organic wastewater with simultaneously improved permeability, catalytic property and anti-fouling

The Fe 3 O 4 @UiO-66-NH 2 /PVDF-co-CTFE mixed matrix membrane with enhanced anti-fouling and self-cleaning performances for effectively removing dyes by Fenton reaction

Efficient Fenton-Like Catalysis Boosting the Antifouling Performance of the Heterostructured Membranes Fabricated via Vapor-Induced Phase Separation and In Situ Mineralization

Integrated process for membrane fouling mitigation and organic pollutants removal using copper oxide modified ceramic hollow fiber membrane with in-situ peroxymonosulfate activation

Photocatalytic membrane coated with α-Fe2O3/Fe3O4 for enhanced filtration performance and antifouling property in surface water treatment

Catechol-Fe(III) complexes modified PVDF membrane for hazardous pollutants separation and antifouling properties

Surface modified by green synthetic of Cu-MOF-74 to improve the anti-biofouling properties of PVDF membranes

The anti-fouling and mechanism of Fe3O4@PVDF catalytic membrane in-situ coupling Fenton oxidation for organic pollutants removal

Reactive, Self-Cleaning Ultrafiltration Membrane Functionalized with Iron Oxychloride Nanocatalysts.

Hierarchical Ultrafiltration-Catalysis Ceramic Membrane for Enhanced Oily Wastewater Treatment: the Synergy Effect Between High-Efficiency Catalysis and Separation

Preparation of Co3O4@carbon Nanotubes Modified Ceramic Membrane for Simultaneous Catalytic Oxidation and Filtration of Secondary Effluent

In situ deposition of double Fe-based Fenton catalysts on the porous membrane for the development of multi-defense against various foulants toward highly efficient water purification