Abstract:Membrane separation technology often suffers from fouling during operation and undergoes a trade-off effect between permeability and selectivity. We report a new strategy for fabricating antifouling poly(vinylidene fluoride) (PVDF) ultrafiltration membrane by incorporating hydrophilic, positive-charge tuned quaternized chitosan magnetic particles (QCMP). Fe 3 O 4 -chitosan particles were synthesized by co-precipitation and cross-linked by glutaraldehyde, and further quaternization modification was applied to obtain a series of QCMP with different charge densities. Then, the QCMP were incorporated into the matrix of PVDF to prepare hybrid membrane via the non-solvent-induced phase separation method. The effect of incorporated QCMP on the membrane morphology and properties was determined using scanning electron microscopy, water contact angle, surface free energy, membrane pore size and porosity. The incorporation of QCMP into the PVDF membrane effectively increased the surface hydrophilicity. Results of bovine serum albumin (BSA) solution filtration showed a higher flux recovery ratio (FRR) and a lower total fouling ratio(R t ) of the QCMP/PVDF hybrid membranes than those of the PVDF pristine membrane, indicating the addition of QCMP was helpful to enhance antifouing performance for BSA via improving hydrophilicity and neutralizing the surfaces of negatively charged PVDF membranes. Furthermore, the permeability flux of BSA was increased by 53 % and the rejection rate was also increased by 26 %, indicating the hybrid membranes have the potential to break the permeability-selectivity trade-off. Therefore, this study provided a green, simple and effective method for the rational design and construction membranes with enhanced the permeability and selectivity as well as antifouling performance.

Surface modified by green synthetic of Cu-MOF-74 to improve the anti-biofouling properties of PVDF membranes

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

A novel membrane showing both hydrophilic and oleophobic surface properties and its non-fouling performances for potential water treatment applications

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Antifouling modification of PVDF membranes via in situ mixed-charge copolymerization and TiO2 mineralization

Enhanced Mitigation of Membrane Fouling and Degradation of Perfluorooctanoic Acid in the Treatment of Natural Surface Water Through the Application of Dielectric Barrier Discharge/sulfite

Modification of polyvinylidene fluoride membrane with ciprofloxacin to improve the bacteriostatic performance

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

A Coupled Molybdenum Disulfide - Copper Modification of NF Membrane for Enhanced Anti-Bacterial Performance

Modification of polyvinylidene fluoride membrane by silver nanoparticles-graphene oxide hybrid nanosheet for effective membrane biofouling mitigation

Outstanding anti-bacterial thin-film composite membrane prepared by incorporating silver-based metal–organic framework (Ag-MOF) for water treatment

Preparation and characteristics of antibacterial PVDF ultrafiltration membrane modified with co-blending of ciprofloxacin and sulfamethoxazole

Robust surface stability and enhanced anti-fouling property on PVDF ultrafiltration membrane surface: PDA/PEG co-deposition versus traditional PDA coating

Anti-biofouling property and anti-leaching investigation of modifier for PVDF ultrafiltration membrane by incorporating antibacterial graphene oxide derivatives

Design and Construction of Ag@MOFs Immobilized PVDF Ultrafiltration Membranes with Anti-bacterial and Antifouling Properties

Membrane Biofouling Control by Surface Modification of Quaternary Ammonium Compound Using Atom-Transfer Radical-Polymerization Method with Silica Nanoparticle as Interlayer

Antifouling modification of PVDF membranes via incorporating positive-charge tuned quaternized chitosan magnetic particles

Surface modification on thin-film composite reverse osmosis membrane by cation complexation for antifouling

MIL-88A/carbon quantum dots nanomaterials promote the photo-fenton reaction to enhance the fouling resistance of PVDF membrane

Surface engineering for anti-wetting and antibacterial membrane for enhanced and fouling resistant membrane distillation performance

Enhancing the antifouling property of polymeric membrane via surface charge regulation