Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Bifunctional Ni2P/SAPO-11 Catalyst for Simultaneous Hydroisomerization of 1-Hexene and Hydrodesulfurization of Thiophene

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Hydroisomerization with a Hierarchical SAPO‐11 Supported Ni Catalyst: Effect of DTAB Content[]**

The direct synthesis of Ni/SAPO-11 hydroisomerization catalyst via a novel two-step crystallization strategy

Synthesis of Nickel In Situ Modified SAPO-11 Molecular Sieves and Hydroisomerization Performance of Their NiWS Supported Catalysts

Design and Preparation of Efficient Hydroisomerization Catalysts by the Formation of Stable Sapo-11 Molecular Sieve Nanosheets with 10-20 Nm Thickness and Partially Blocked Acidic Sites

Synthesis of bimetallic Ni-Pt/SAPO-11 composite and the catalytic application in n-heptane hydroisomerization

Hydroisomerization of Model FCC Naphtha over Sulfided Co(Ni)–Mo(W)/MCM-41 Catalysts

Enhanced dispersion of nickel nanoparticles on SAPO-5 for boosting hydroisomerization of n-hexane

A highly loaded and dispersed Ni2P/SiO2 catalyst for the hydrotreating reactions

Influences of the metal-acid proximity of Pd-SAPO-31 bifunctional catalysts for n-hexadecane hydroisomerization

Synergetic effect between the metal and acid sites of Pd/SAPO-41 bifunctional catalysts in n-hexadecane hydroisomerization

Supported NiW Catalysts with Tunable Size and Morphology of Active Phases for Highly Selective Hydrodesulfurization of Fluid Catalytic Cracking Naphtha

The synergic effects of highly selective bimetallic Pt-Pd/SAPO-41 catalysts for the n-hexadecane hydroisomerization

Ni 2P catalysts supported on titania-modified alumina for the hydrodesulfurization of dibenzothiophene

Optimization of the pore structure and acidity of SAPO-11 for highly efficient hydroisomerization on the long-chain alkane

Instant Exactness Synthesis and N-Heptane Hydroisomerization of High Performance Ni/SAPO-11 Catalyst

The Synthesis of a Pt/SAPO-11 Composite with Trace Pt Loading and Its Catalytic Application in n-Heptane Hydroisomerization

Hydroisomerization of n-Hexadecane Over Nickel-Modified SAPO-11 Molecular Sieve-Supported NiWS Catalysts: Effects of Modification Methods

Ni<sub>2</sub>P Catalysts Supported on Titania-Modified Alumina for the Hydrodesulfurization of Dibenzothiophene