Abstract:In this paper, we present a 3D ablation material response model for lightweight quartz fiber reinforced phenolic composite. The model is used to predict the surface and back temperature, linear ablation velocity, and quality loss rate of the material. The temperature field, pyrolysis degree and flow field distribution of the material during the ablation process are also analyzed by the model. The model has been verified by experiment. Our work provides some guidance for the application of LQP composite in the field of thermal protection structure. To understand the ablation mechanism of materials is crucial for the design of thermal protection system (TPS) for manned reentry vehicles. To investigate the thermal behavior of lightweight quartz fiber reinforced phenolic (LQP) composite subjected to an aerodynamic hyper‐thermal environment, a 3D ablation material response model for the LQP composite is developed with surface and volume ablation in consideration. It is used to predict surface and back temperature, linear ablation velocity, and quality loss rate of the material. The 3D temperature field, pyrolysis degree, gas flow, and pressure field are analyzed as well. To evaluate the accuracy of the model, an ablation test of oxyacetylene flame is adopted on the LQP composite. In the ablation process, the pyrolysis gases propagate primarily through the surface primarily and through the sidewall afterwards. The gas pressure peaks at the early stage rather than increasing constantly. The analysis of thermal insulation mechanism of the LQP composite indicates that the radiation and heat blockage effect are the primary factors to improve the ablation resistance, accounting for 50.0% and 37.3% of the improvement, respectively. The low thermal conductivity determines the admirable thermal insulation performance. The surface temperature of material can be reduced by introducing high emissivity powder into the material, preparing coating on the surface, and adjusting the content of phenolic and silica fiber.

Effects of Pyrolysis Reaction and Gas Characteristics on the Thermal Response of Resin-Based Ablative Materials

Modeling and Validation of Ablative Thermal Response Combined with Microscopic Heat Transfer for Porous Ablative Materials

Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Heat transfer and pyrolysis gas flow characteristics of light-weight ablative thermal protection system in the blunt body

Evaluation of Numerical Ablation Model for Charring Composites

A Model for Thermal Protection Ablative Material with Local Thermal Non-Equilibrium and Thermal Radiation Mechanisms

Influence Factors on the Multi-Field Coupling Performances of Charring Ablators on the Basis of a Mesoscopic Ablation Model

Assessment of a 3D ablation material response model for lightweight quartz fiber reinforced phenolic composite

Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations

Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis

Attenuation of Incident Heat Flux by Pyrolysis Volatiles when Heated Using Resistance Element Radiant Heater

Investigation of Thermal Transport Mechanism of Silicone-Modified Phenolic Matrix Nanocomposites with Different Pyrolysis Degrees

Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation

Inverse Identification of Temperature-Dependent Thermal Conductivity for Charring Ablators

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Investigating the pyrolysis mechanisms of three archetypal ablative resins through pyrolysis experiments and ReaxFF MD simulations

Radiation Attenuation Characteristics of Pyrolysis Volatiles of Solid Fuels and Their Effect for Radiant Ignition Model

Effect of Various Fibers on the Ablation Resistance of Poly(diaryloxyphosphazene) Elastomer

Forecasting method for ablation behaviors of carbon/phenolic composites

Effect of Catalytic Properties on the Thermal Loads and Radiation Characteristics for Re-entry Capsules

Pyrolysis mechanism and combustion behaviors of high impact polystyrene improved by modified ammonium polyphosphate and graphene