Abstract:Exploring the crucial role of dark current in 2D infrared optoelectronics, this review discusses the dark current generation mechanisms and summarizes the main methods for suppressing dark current in 2D infrared photodetectors. Diverse device structures and working mechanisms based on various dark current suppression strategies are discussed. Conclusions and future perspectives are delivered as a guideline for this thriving field. Narrow‐bandgap 2D materials and semimetals, for example, graphene, black phosphorus (BP), tellurium (Te), and some novel transition metal dichalcogenides (TMDs), have been demonstrated to be promising building blocks for constructing next‐generation state‐of‐the‐art infrared (IR) photodetectors. However, these devices suffer from a significant dark current, primarily attributed to the intrinsic thermal excitation‐induced high carrier concentration. Suppressing the dark current is an essential issue in pursuing higher specific detectivity of IR photodetectors. Here, the authors demonstrate recent advances in suppressing dark current for 2D IR photodetectors. First, a brief insight into the dark current composition and mechanisms of 2D IR photodetectors is illustrated. Then, the varied band alignment for blocking dark current by the interfacial barrier is discussed. Next, localized electric field modulation by applying a gate voltage and ferroelectric materials is discussed. This method can effectively tune the concentration and distribution of carriers in the device conductive channel. Following that, interfacial engineering is summarized, by which interfacial defects can be passivated and interlayer defect‐induced dark current can be suppressed. Finally, the challenges and an outlook are delivered for developing state‐of‐the‐art IR photodetectors.

Blocking Layer of Dark Current for Si-based Short-Wave Infrared Photodetection

Dark-Current-Blocking Mechanism in BIB Far-Infrared Detectors by Interfacial Barriers

The Anti-Reflection Coating Design for the Very-Long-Wave Infrared Si-Based Blocked Impurity Band Detectors

Dark Current Mechanisms and Suppression Strategies for Infrared Photodetectors Based on Two‐Dimensional Materials

The Effect of Infrared Plasmon on the Performance of Si-based THz Detectors

Ge-based Mid-Infrared Blocked-Impurity-band Photodetectors

Blocked Impurity Band Very Long Wavelength Infrared Detector

The Research Progress of Si-based Blocked-Impurity-band Infrared Detecting Materials and Detectors

Design of uncooled mid-wave infrared detectors based on lead selenide barrier structure

Effect of "M" and "B" superlattice barrier layers on dark current of long-wavelength infrared detectors

Suppressing the Dark Current While Improving the Quantum Efficiency in Shortwave Infrared Organic Photodetectors Through Naphthalenediimide‐Based Interlayer

Low dark current Sb-based short-wavelength infrared photodetector

Bulk Defect-Mediated Absorption Sub-Bandgap All-Silicon Photodetector with Low Dark Current Density at Ambient Temperatures

Photogating-controlled ZnO Photodetector Response for Visible to Near-Infrared Light.

Optimized Si-Based Blocked Impurity Band Detector under Alternative Operational Mode

Black Arsenic Phosphorus Mid-Wave Infrared Barrier Detector with High Detectivity at Room Temperature

Dark Current in Long-Wave Cascade-Transport Infrared Up-Converters

Optimization of thickness and doping of heterojunction unipolar barrier layer for dark current suppression in long wavelength strain layer superlattice infrared detectors

Temperature-sensitive mechanism for silicon blocked-impurity-band photodetectors

Origin and suppression of dark current for high-performance colloidal quantum dot short-wave infrared photodetectors

P‐134: Organic Buffer Layer Depressed Dark Current of Short‐Wave Infrared PbS Quantum Dot Photodetector