Abstract:We proposed a novel sensor based on an ultracompact leaky-guided liquid core fiber Mach–Zehnder interferometer (LLCFMZI) for high modulation of an interference spectrum. The sensor structure is based on a micro-sized hollow-core fiber (HCF) splicing a tilt end face single-mode fiber (SMF) to create a miniature oblique gap for the effective access of different liquids. The liquid core with a relatively lower refractive index (RI) than the cladding can achieve a leaky-mode optical waveguide (LMOW) mechanism, and its volume is only approximately 7.85 pL. In addition, the utilized micro-length HCF can reduce the energy loss of core in the LMOW to obtain an acceptable extinction ratio (>30 dB) with high temperature (T) sensitivity in the interference spectra. Experimental results show that the interference spectra can be highly modulated within the wide measurement range of 1250–1650 nm with a steadily linear response for thermal effect. The measured temperature sensitivities (T-sensitivities) of various liquids of DI water, ethanol, and Cargille-liquid (nD = 1.305) are 0.8869, 4.4754, and 4.8229 nm/°C, and the corresponding measured thermal optics coefficient (TOC) are −4.16 × 10−5, −2.11 × 10−4, and −3.6 × 10−4 °C−1, respectively. Measurement results demonstrate that the used liquids with a higher TOC can obtain better T-sensitivity modulation. The highest experimental sensitivity of the liquid-core filled with Cargille-liquid (nD = 1.40) is up to +13.87 nm/°C with a corresponding TOC of −4.07 × 10−4 °C−1. Furthermore, the experimental and theoretical values are in good agreement according to FSR the measuring scheme that investigates the effectiveness of the proposed LLCFMZI.

Liquid Level Measurement by Using Waist-Enlarged Fusion Taper in No-Core Fiber

A thin-core fiber modal interferometer for liquid-level sensing

Design and Demonstration of A Liquid Level Fiber Sensor Based on Self-Imaging Effect

High Refractive Index Liquid Level Measurement via Coreless Multimode Fiber

Liquid level sensor based on a single-mode hetero-core fiber structure

A liquid lever sensor based on an abrupt taper and micro‐arc Michelson interferometer in single‐mode fiber

In-fiber Liquid-Level Probe Based on Michelson Interferometer Via Dual-Mode Elliptical Multilayer-Core Fiber

Liquid Level Sensor Based on Fiber Core-offset Attenuation

High sensitivity liquid level sensor for microfluidic applications using a hollow core fiber structure

Temperature-insensitive Optical Fiber Reflective Micro-Liquid Level Sensor Base on the Drop Shape Quasi-Mach Zehnder Interferometer

Highly Modulated In-Fiber Mach–Zehnder Interferometer Based on an Ultracompact Leaky-Guided Liquid Core

High-resolution liquid level sensor utilizing a microwave photonics interrogated multicore fiber interferometer

Self-Temperature Compensated Fiber-Optic Liquid Level Sensor With Ultra-Long Linear Range Using Quasi-Single Modal Interferometer

High Sensitivity Optical Fiber Liquid Level Sensor Based on a Compact MMF-HCF-FBG Structure

Liquid-level Sensing Based on a Hollow Core Bragg Fiber.

The Liquid Level Monitoring with Sub-Millimeter Resolution by Discrete Wavelength Sampling Method

Detection of Liquid Level with an MI-Based Fiber Laser Sensor Using Few-Mode EMCF

Fiber-tip-integrated High-sensitivity Refractive Index and High-precision Liquid Level Sensor Based on Surface Plasmon Resonance

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers

Low Refractive-Index and Temperature Crosstalk Fiber-Optic Liquid Level Sensor Based on Cascaded Quasi-Microfiber and Double-Cladding Fiber Structure

Precise Measurement of Liquid-Level by Fiber Loop Ring-Down Technique Incorporating an Etched Fiber