Abstract:Continuous fiber reinforced metal matrix composites (CFMMCs) offer higher specific strength, specific modulus, and operating temperature than matrix metals due to the unique enforcement mechanism of the one-to-one scale arrangement of matrix and reinforced phases. Due to the heterogeneous characteristics between the plastic matrix and brittle fibers, the removal mechanism of CFMMCs during processing is exceptionally complex. Ultrasonic vibration-assisted grinding (UVAG) shows great advantages in machining difficult-to-cut materials (i.e., ceramics and composites) by changing the motion trajectory between grains and workpieces, effectively reducing grinding force and improving machining quality. However, little is known about the removal mechanism of UVAG for CFMMCs composed of the ductile (i.e., metal matrix) and brittle (i.e., SiC fiber) phases with highly anisotropic structure characteristics. This raises the question of how CFMMCs with heterogeneous components perform under abrasive processing and how to predict their processing forces. Hence, UVAG and conventional grinding (CG) experiments with single CBN grain were carried out on SiC fiber reinforced TC17 matrix composites (SiCf/TC17) in this work. A grinding force model considering both phases and materials structure from energy aspect was proposed. A theoretical model for suppressing SiC fiber damage has been proposed, which is expected to guide low-damage processing of brittle materials. According to the results, the removal models of CFMMCs are revealed including: i) macro fracture of SiC fiber, ii) neat fracture of SiC fiber, and iii) TC17 matrix massive adhesion on the SiC fiber. Besides, no cracks crossing fibers are observed on the subsurface of SiC fiber under both UVAG and CG due to the good support of the TC17 matrix on SiC fibers. The grinding force predicted model error decreases as ap increases. When ap is 50 mu m, the errors between predicted and experimental values are 7.8 % and 9.1 % for normal forces (Fn) and tangential forces (Ft), respectively. Ultrasound suppresses the severe wear behavior of grains, thereby improving the tool life. This paper aims to comprehensively reveal the characteristics of abrasive processing of CFMMCs from various aspects (surface morphology, subsurface features, grinding force prediction, and tool wear), which will promote the industrial application of CFMMCs.

Study on Removal Mechanism and Surface Quality of SiCf/SiC Composites by Longitudinal Torsional Ultrasonic Vibration-Assisted Grinding

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of SiO2f/SiO2Composites

Effect of Ultrasonic Vibration Assisted Grinding Process on Surface Topography and Properties of C/SiC Composite

Investigation on the machined surface quality and removal mechanism of SiCf/SiC composites in ultrasonic-assisted grinding

Study on surface/subsurface breakage in ultrasonic assisted grinding of C/SiC composites

Study of Material Removal Mechanisms in Grinding of C/SiC Composites Via Single-Abrasive Scratch Tests

Investigation on machined surface quality in ultrasonic-assisted grinding of Cf/SiC composites based on fracture mechanism of carbon fibers

Experimental Investigation on Tool Wear in Ultrasonic Vibration-Assisted Turning of SiCf/SiC Ceramic Matrix Composite

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

Research on Material Removal Mechanism of C/SiC Composites in Ultrasound Vibration-Assisted Grinding

Experimental Study on the Removal Behavior of SiCf/SiC by Traditional and Ultrasonic Vibration Assist Scratching with Single Grain Diamond

Material Removal Behavior of Ultrasonic Vibration Helical Grinding of SiCf/SiC Composites

Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics

Comprehensive Investigation into Grinding Characteristics and Damage Behavior of Cf/SiC Composite Modified by Picosecond-Laser Ablating

Heterogeneous Components Removal Mechanism and Grinding Force Model from Energy Aspect in Ultrasonic Grinding Continuous Fiber Reinforced Metal Matrix Composites

Study on removal mechanism and surface quality of grinding carbon fiber toughened ceramic matrix composite

Grinding characteristics and removal mechanisms of unidirectional carbon fibre reinforced silicon carbide ceramic matrix composites

Characterization of Material Removal in Ultrasonically Assisted Grinding of SiCp/Al with High Volume Fraction

Ultrasonic assisted helical grinding of SiCf/SiC ceramic matrix composites

Axial and composite ultrasonic vibration-assisted face grinding of silicon carbide ceramics: grinding force and surface quality

Influence Factors on Grinding Force in Surface Grinding of Unidirectional C/SiC Composites