Numerical Investigation into the Influence of Interfacial Transition Zone on Elastic Modulus, Creep, Shrinkage of Concrete

Guofeng Song,Ningyu Zou,Ya Wei,Abudushalamu Aili,Siming Liang

DOI: https://doi.org/10.1016/j.conbuildmat.2024.138112

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:Interfacial transition zone (ITZ) is a weak part around aggregate in concrete, which could threaten the macroscopic properties of concrete such as strength, stiffness, deformation, and durability. However, it is difficult to quantify the ITZ effect on the macroscopic behavior of concrete only by experimental methods due to the tiny thickness of ITZ. This study employed finite element (FE) method to investigate the ITZ effect on the elastic modulus, creep, and shrinkage. A mesoscale three-phase FE model consisting of homogeneous matrix phase, aggregates and ITZ around them was developed for concrete in this study. The influences of the FE model dimension and the meshing size on the calculated results were first discussed. Then the influence of the thickness, viscoelasticity and shrinkage of ITZ on the macroscopic properties of concrete were evaluated based on the FE calculation and grey relation analysis. Finally, the measured elastic modulus, creep and shrinkage of concrete with different contents of clay on coarse aggregates were used to validate the FE model. It is found that the calculated results of the two-dimensional (2D) FE model are in good agreement with those of the three-dimensional (3D) FE model under the linear viscoelastic assumption. The meshing size has a minor effect on the calculated results when it is 0.2–2 times of the ITZ thickness. The influence of ITZ properties on the macroscopic properties of concrete will become more significant as the ITZ thickness increases. Moreover, the elastic modulus of ITZ has a greater impact on the effective properties of concrete than the thickness, creep, and shrinkage of ITZ. The findings in study can contribute to a better understanding of ITZ effect on the macroscopic properties of concrete and provide references to the reasonable consideration of ITZ in numerical studies.