Abstract:Interfacial transition zone (ITZ) is a weak part around aggregate in concrete, which could threaten the macroscopic properties of concrete such as strength, stiffness, deformation, and durability. However, it is difficult to quantify the ITZ effect on the macroscopic behavior of concrete only by experimental methods due to the tiny thickness of ITZ. This study employed finite element (FE) method to investigate the ITZ effect on the elastic modulus, creep, and shrinkage. A mesoscale three-phase FE model consisting of homogeneous matrix phase, aggregates and ITZ around them was developed for concrete in this study. The influences of the FE model dimension and the meshing size on the calculated results were first discussed. Then the influence of the thickness, viscoelasticity and shrinkage of ITZ on the macroscopic properties of concrete were evaluated based on the FE calculation and grey relation analysis. Finally, the measured elastic modulus, creep and shrinkage of concrete with different contents of clay on coarse aggregates were used to validate the FE model. It is found that the calculated results of the two-dimensional (2D) FE model are in good agreement with those of the three-dimensional (3D) FE model under the linear viscoelastic assumption. The meshing size has a minor effect on the calculated results when it is 0.2–2 times of the ITZ thickness. The influence of ITZ properties on the macroscopic properties of concrete will become more significant as the ITZ thickness increases. Moreover, the elastic modulus of ITZ has a greater impact on the effective properties of concrete than the thickness, creep, and shrinkage of ITZ. The findings in study can contribute to a better understanding of ITZ effect on the macroscopic properties of concrete and provide references to the reasonable consideration of ITZ in numerical studies.

Method of Meshing ITZ Structure in 3D Meso-Level Finite Element Analysis for Concrete

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

A 3-D Computational Model of Mesoscale Structure of Concrete with Polyhedron Aggregate

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Automated generation of FE mesh of concrete structures from 3D point cloud using computer vision technology

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Numerical Investigation into the Influence of Interfacial Transition Zone on Elastic Modulus, Creep, Shrinkage of Concrete

A Numerical Algorithm for the ITZ Area Fraction in Concrete with Elliptical Aggregate Particles

Three phase mesoscopic concrete model based on real inner structure of concrete sample

Numerical Analysis of Effective Permeability of Concrete-Like Material With a Random Three-Phase Mesostructure

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Generation and property analyses of 3D mesoscale models for plain and fiber reinforced concretes

An n-layered spherical inclusion model for predicting the elastic moduli of concrete with inhomogeneous ITZ

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

A Multiphase Numerical Simulation of Chloride Ions Diffusion in Concrete Using Electron Microprobe Analysis for Characterizing Properties of ITZ

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Interfacial debonding constitutive model and XFEM simulation for mesoscale concrete

Numerical Method for Predicting Young's Modulus of Concrete with Aggregate Shape Effect

Mesoscopic discrete modeling of compression and fracture behavior of concrete: Effects of aggregate size distribution and interface transition zone