Abstract:Conventional thermosets rely on petrochemical products, and cannot be reprocessed, recycled, or reshaped under mild conditions owing to their permanent, highly crosslinked structure. Although some of these materials are down-cycled into lower-value products, most thermosets are incinerated, landfilled, or otherwise unaccounted for (i.e. leakage), which intensifies the problem of resource shortage and environmental pollution. In this work, wheat straw lignin (Protobind 1000) was used as a raw material to prepare modified lignin by a non-catalytic reaction with t-butyl acetoacetate. The modified lignin was cross-linked with fatty acid diamine (PriamineTM 1075), and a fully biobased vitrimer material was successfully prepared. The vitrimers have high lignin content (40-50 wt%). The mechanical properties of these vitrimers could be adjusted by changing the density of the cross-linked network inside the material, which is determined by the ratio of modified lignin and diamine. In the case of elevated temperature (>100 oC), the dynamic chemical bonds (vinylogous urethane amine exchange) inside the material are activated, which allows the material to be recycled and reused. Rheology was used to study time and temperature-dependent stress relaxation dynamics. Experimental results show that the relaxation time typically ranges from 104 s at 150 °C to 9 s at 180 °C, exhibiting a rapid relaxation throughout the process without the addition of any catalyst. A potential application for this work is on-demand removable adhesives. The dry shear stress of the adhesive is 12.7 MPa (170 oC, 40 bar, 0.5 h), and the wet shear strength is similar under different conditions, with a minimum strength of 3.5 MPa. The superb adhesive strength mainly stems from the formation of abundant hydrogen bonds and mechanical interlocking between the adhesive and the wood. Combining the special solvent swelling behavior of the vitrimer material itself and the rapid exchange of dynamic chemical bonds of the material at high temperatures, we propose to use both solvent removal and heat removal methods to remove the adhesive, and the removed adhesive can be recycled. This work provides a case for biobased vitrimer to promote the development and utilization of advanced biobased thermoset materials.

A Simple-Prepared and Multi-Reusable Adhesive Based on Epoxy Vitrimer

High-Strength and Multi-Recyclable Epoxy Vitrimer Containing Dual-Dynamic Covalent Bonds Based on the Disulfide and Imine Bond Metathesis

Epoxy-based multifunctional re-bondable polymer with self-healing, shape memory and superb bonding properties

Superstrong yet water-detachable eutectogel adhesives

High Capacity, Easy Release Adhesives From Renewable Materials

Dual Dynamic Cross-Linked Epoxy Vitrimers Used for Strong, Detachable, and Reworkable Adhesives

Molecular Engineering Super-Robust Dry/Wet Adhesive with Strong Interface Bonding and Excellent Mechanical Tolerance

Mechanically Strong, Thermally Healable, and Recyclable Epoxy Vitrimers Enabled by ZnAl-Layer Double Hydroxides

Tough, Instant, and Repeatable Adhesion of Self‐Healable Elastomers to Diverse Soft and Hard Surfaces

Super Strong and Multi-Reusable Supramolecular Epoxy Hot Melt Adhesives

Asynchronous Ring Opening of Cyclic Carbonate and Glycidyl Ether Induced Phase Evolution Towards Heat‐free and Rapid‐bonding Superior Epoxy Adhesive

Preparation of natural adhesives with high-strength and low temperature fast-curing properties

Versatile Epoxidized Soybean Oil-Based Resin with Excellent Adhesion and Film-Forming Property

Zwitterion‐Initiated Spontaneously Polymerized Super Adhesive Showing Real‐Time Deployable and Long‐Term High‐Strength Adhesion against Various Harsh Environments

Sustainable Snail‐Inspired Bio‐Based Adhesives with Ultra‐High Adhesion

A Biobased Epoxy Vitrimer with Dual Relaxation Mechanism: A Promising Material for Renewable, Reusable, and Recyclable Adhesives and Composites

A multi-purpose adhesive with high strength and bond sensitive stress sensing

One-Pot Preparation of Double-Network Epoxy Vitrimers with High Performance, Recyclability, and Two-Stage Stress Relaxation

Preparation of a Lignin-Based Vitrimer Material and Its Potential Use for Recoverable Adhesives

Triethanolamine-Mediated Covalent Adaptable Epoxy Network: Excellent Mechanical Properties, Fast Repairing, and Easy Recycling

Preparation of lignin-based vinylogous urethane vitrimer materials and their potential use for on-demand removable adhesives