Abstract:Conventional thermosets rely on petrochemical products, and cannot be reprocessed, recycled, or reshaped under mild conditions owing to their permanent, highly crosslinked structure. Although some of these materials are down-cycled into lower-value products, most thermosets are incinerated, landfilled, or otherwise unaccounted for (i.e. leakage), which intensifies the problem of resource shortage and environmental pollution. In this work, wheat straw lignin (Protobind 1000) was used as a raw material to prepare modified lignin by a non-catalytic reaction with t-butyl acetoacetate. The modified lignin was cross-linked with fatty acid diamine (PriamineTM 1075), and a fully biobased vitrimer material was successfully prepared. The vitrimers have high lignin content (40-50 wt%). The mechanical properties of these vitrimers could be adjusted by changing the density of the cross-linked network inside the material, which is determined by the ratio of modified lignin and diamine. In the case of elevated temperature (>100 oC), the dynamic chemical bonds (vinylogous urethane amine exchange) inside the material are activated, which allows the material to be recycled and reused. Rheology was used to study time and temperature-dependent stress relaxation dynamics. Experimental results show that the relaxation time typically ranges from 104 s at 150 °C to 9 s at 180 °C, exhibiting a rapid relaxation throughout the process without the addition of any catalyst. A potential application for this work is on-demand removable adhesives. The dry shear stress of the adhesive is 12.7 MPa (170 oC, 40 bar, 0.5 h), and the wet shear strength is similar under different conditions, with a minimum strength of 3.5 MPa. The superb adhesive strength mainly stems from the formation of abundant hydrogen bonds and mechanical interlocking between the adhesive and the wood. Combining the special solvent swelling behavior of the vitrimer material itself and the rapid exchange of dynamic chemical bonds of the material at high temperatures, we propose to use both solvent removal and heat removal methods to remove the adhesive, and the removed adhesive can be recycled. This work provides a case for biobased vitrimer to promote the development and utilization of advanced biobased thermoset materials.

Preparation of a Lignin-Based Vitrimer Material and Its Potential Use for Recoverable Adhesives

Preparation of lignin-based vinylogous urethane vitrimer materials and their potential use for on-demand removable adhesives

Lignin-based epoxy composite vitrimers with light-controlled remoldability

A Biobased Epoxy Vitrimer with Dual Relaxation Mechanism: A Promising Material for Renewable, Reusable, and Recyclable Adhesives and Composites

Exploiting Lignin Structure and Reactivity to Design Vitrimers with Controlled Ratio of Dynamic to Non‐Dynamic Bonds

Custom-designed polyphenol lignin for the enhancement of poly(vinyl alcohol)-based wood adhesive

Broad-spectrum lignin-based adhesives using thiol–silyl ether crosslinkers

Versatile value-added application of hyperbranched lignin derivatives: Water-resistance adhesive, UV protection coating, self-healing and skin-adhesive sensing

A Biobased Vitrimer: Self-Healing, Shape Memory, and Recyclability Induced by Dynamic Covalent Bond Exchange

Bio-Based Epoxy Vitrimers with Excellent Properties of Self-Healing, Recyclability, and Welding

Facile in situ preparation of high-performance epoxy vitrimer from renewable resources and its application in nondestructive recyclable carbon fiber composite

Biomimetic lignin-protein adhesive with dynamic covalent/hydrogen hybrid networks enables high bonding performance and wood-based panel recycling

Fast Relaxing Sustainable Soft Vitrimer with Enhanced Recyclability

Design of inherent fire retarding and degradable bio-based epoxy vitrimer with excellent self-healing and mechanical reprocessability

Bioinspired 'phenol-amine' cross-linking and mineral reinforcement enable strong, tough, and formaldehyde-free tannic acid-based adhesives

Lignin-based vitrimer containing dynamic borate ester bonds with intrinsic photoconversion and excellent photothermal remoldability

Research Progress in Lignin/vanillin-Based Vitrimer and Recyclable Carbon Fiber Composites

Fabrication of lignin based renewable dynamic networks and its applications as self-healing, antifungal and conductive adhesives

Lignin Oligomers from Mild Base-catalyzed Depolymerization for Potential Application in Aqueous Soy Adhesive as Phenolic Blends

Fully rosin-based epoxy vitrimers with high mechanical and thermostability properties, thermo-healing and closed-loop recycling

High strength, self-healing and hydrophobic fully bio-based polybenzoxazine reinforced pine oleoresin-based vitrimer and its application in carbon fiber reinforced polymers