Abstract:Cobalt-based nanomaterials have been widely studied as catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) due to their remarkable bifunctional catalytic activity, low cost, and easy availability. However, controversial results concerning OER/ORR performance exist between different types of cobalt-based catalysts, especially for Co(OH)2 and Co3O4. To address this issue, we develop a facile electrochemical deposition method to grow Co(OH)2 directly on the skeleton of carbon cloth, and further Co3O4 was obtained by post thermal treatment. The entire synthesis strategy removes the use of any binders and also avoids the additional preparation process (e.g., transfer and slurry coating) of final electrodes. This leads to a true comparison of the ORR/OER catalytic performance between Co(OH)2 and Co3O4, eliminating uncertainties arising from the electrode preparation procedures. The surface morphologies, microstructures, and electrochemical behaviors of prepared Co(OH)2 and Co3O4 catalysts were systemically investigated by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and electrochemical characterization methods. The results revealed that the electrochemically deposited Co(OH)2 was in the form of vertically aligned nanosheets with average thickness of about 4.5 nm. After the thermal treatment in an air atmosphere, Co(OH)2 nanosheets were converted into mesoporous Co3O4 nanosheets with remarkably increased electrochemical active surface area (ECSA). Although the ORR/OER activity normalized by the geometric surface area of mesoporous Co3O4 nanosheets is higher than that of Co(OH)2 nanosheets, the performance normalized by the ECSA of the former is lower than that of the latter. Considering the superior apparent overall activity and durability, the Co3O4 catalyst has been further evaluated by integrating it into a Zn-air battery prototype. The Co3O4 nanosheets in situ supported on carbon cloth cathode enable the assembled Zn-air cells with large peak power density of 106.6 mW cm-2, low charge and discharge overpotentials (0.67 V), high discharge rate capability (1.18 V at 20 mA cm-2), and long cycling stability (400 cycles), which are comparable or even superior to the mixture of state-of-the-art Pt/C and RuO2 cathode.

Molten Salt Method for Preparing Mn0.3Ru0.7O2 Nanosheets As a Superior Bifunctional Catalyst for Rechargeable Zinc-Air Batteries

Rich atomic interfaces between sub-1 nm RuOx clusters and porous Co3O4 nanosheets boost oxygen electrocatalysis bifunctionality for advanced Zn-air batteries

Associating Co single atoms with RuO2 nanoparticles anchor on nitrogen-doped ultrathin porous carbon nanosheets as effective bifunctional oxygen electrocatalysts for rechargeable Zn–air batteries

Improved oxygen evolution reaction performance in Co0.4Mn0.6O2 nanosheets through Triple-doping (Cu, P, N) strategy and its application to Zn-air battery

Synergistic Effect of Ru Single Atoms and MnO2 to Boost Oxygen Reduction/evolution Activity Via Strong Electronic Interaction

Superdurable Bifunctional Oxygen Electrocatalyst for High-Performance Zinc–Air Batteries

Manganese-doped Cobalt Spinel Oxide As Bifunctional Oxygen Electrocatalyst Toward High-Stable Rechargeable Zn-air Battery

In Situ Space-Confined Growth of Co3O4 Nanoparticles Inside N-doped Hollow Porous Carbon Nanospheres As Bifunctional Oxygen Electrocatalysts for High-Performance Rechargeable Zinc-Air Batteries

Cobalt oxide nanosheets anchored on loofah sponge-derived carbon as a high-performance bifunctional electrocatalyst for rechargeable zinc-air batteries

Bimetal Oxides Anchored on Carbon Nanotubes/Nanosheets as High-Efficiency and Durable Bifunctional Oxygen Catalyst for Advanced Zn-Air Battery: Experiments and DFT Calculations

MnOx anchored on N and O co-doped carbon nanotubes encapsulated with FeCo alloy as highly efficient bifunctional electrocatalyst for rechargeable Zinc-Air batteries

Activating Ru nanoclusters for robust oxygen reduction in aqueous wide-temperature zinc-air batteries

Electronic structure modulation of bifunctional oxygen catalysts for rechargeable Zn-air batteries

Engineering charge redistribution on high-density RuCo nanoclusters loaded on N-doped graphite carbon as robust bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries

Regulating the Interfacial Electron Density of La0.8Sr0.2Mn0.5Co0.5O3/RuOx for Efficient and Low-Cost Bifunctional Oxygen Electrocatalysts and Rechargeable Zn-Air Batteries.

Co/Co3O4 Heterojunctions Encased in Porous N-Doped Carbon Nanocapsules for High-Performance Cathode of Rechargeable Zinc-Air Batteries

A Novel Bimetallic RuFe Nanocluster to Enable Highly Efficient Oxygen Reduction in Zinc-Air Batteries

Co(II)1-xCo(0)x/3Mn(III)2x/3S Nanoparticles Supported on B/N-Codoped Mesoporous Nanocarbon As a Bifunctional Electrocatalyst of Oxygen Reduction/Evolution for High-Performance Zinc-Air Batteries.

Clarifying the Controversial Catalytic Performance of Co(OH)2 and Co3O4 for Oxygen Reduction/Evolution Reactions toward Efficient Zn-Air Batteries

MnF2 Surface Modulated Hollow Carbon Nanorods on Porous Carbon Nanofibers as Efficient Bi‐Functional Oxygen Catalysis for Rechargeable Zinc–Air Batteries

In Situ Construction of Perovskite Pr0.5Ba0.5Mn0.8Co0.1Ru0.1O2.5+δ/CoRu Nanoparticles with Co–N–C Composite Enabling Efficient Bifunctional Electrocatalyst for Zinc‐Air Batteries