Abstract:Bearing preload has a great impact on the service performance of high-speed spindle, such as the temperature rise and stiffness. Because of the flatness error of spacer, the axial parallelism error of the spindle, the nonuniform heat distribution of ball bearing and the external loads, the outer ring of the bearing is often subjected to nonuniform distributed loads, which will result in the misalignment between outer ring and spindle. In such conditions, traditional uniform preload method may not meet the requirements for bearing temperature rise and spindle rotation accuracy. In this paper, a nonuniform preload is presented which not only includes the preload magnitude in traditional way, but also involves the preload distribution nonuniformly. Firstly, an equivalent transformation for nonuniform preload is built to simplify the nonuniform preload acting on the outer ring. Then based on the Hertz contact theory and ball bearing geometry theory, a five degrees of freedom quasi-static model of ball bearing under nonuniform preload is established. On the basis of this model, internal load and other contact parameters in bearing are calculated and the heat mechanism of ball bearing is analyzed. Finally, according to the heat generation model under nonuniform preload which include both preload magnitude and distribution, effects of both uniform and nonuniform preload on bearing heat and its distribution are investigated and compared, and the contact forces in bearing are then analyzed. The results show that compared with uniform preload, proper nonuniform preload could effectively improve the contact status between balls and rings, decrease the heat generation rate, and reduce the excessive local heat in ball bearing under practical working conditions.

A Thermal Preload Analysis Method of Angular Ball Bearing Considering Temperature Rise

Thermo-mechanical analysis of angular contact ball bearing

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Study on Thermal Induced Preload of Ball Bearing with Temperature Compensation Based on State Observer Approach

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Determination of Optimum Preload Considering the Skidding and Thermal Characteristic of High-Speed Angular Contact Ball Bearing

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Heat Analysis of Ball Bearing under Nonuniform Preload Based on Five Degrees of Freedom Quasi-Static Model

Investigating effects of non-uniform preload on the thermal characteristics of angular contact ball bearings through simulations

Uneven Heat Generation and Thermal Performance of Spindle Bearings

Transient thermal properties investigation for precision bearing-spindle system considering fixed-position preload and lubricant viscosity-temperature effect

A Preload Analytical Method for Ball Bearings Utilising Bearing Skidding Criterion

Rotation Accuracy Analysis of Spindle under Variable Preload

Analysis on Axial Preload of Angular Contact Ball Bearings Assembly

Experimental Study on Bearing Preload Optimum of Machine Tool Spindle

Heating analysis of the high speed ball bearing

Analysis of Thermo-Mechanical Coupling of High-Speed Angular-Contact Ball Bearings

Effect of structure and assembly constraints on temperature of high-speed angular contact ball bearings with thermal network method

The thermal stability of high-speed ball bearings

Analysis on Dynamic Characteristics of Preloaded High-speed Angular Contact Ball Bearings

Experimental testing and thermal analysis of ball bearings