Abstract:The global trend toward decarbonization is inspiring researchers to search for low or even zero carbon fuels for internal combustion engines. Ammonia (NH3) is considered a potential alternative fuel to conventional gasoline and diesel without carbon emissions. Although it is not an ideal fuel for use in engines due to its poor combustion properties, the use of hydrogen (H-2), which has low ignition energy and can be decomposed from ammonia, as a combustion promoter can enhance its suitability for engine applications. A careful literature review indicates that the relatively few existing studies on NH3/H-2 engines and the uncertainty of the NH3/H-2 chemistry under typical high-temperature and high-pressure engine environments limit the determination of the ammonia-tohydrogen ratio. However, this question is important when converting an existing engine to ammonia operation because it is related to compression ratio determination, aftertreatment design, ECU mapping, and on-board hydrogen production rate requirements. In other words, this outstanding question would affect the simultaneous design of other accessory systems and the development of ammonia engines. To increase the knowledge of the hydrogen concentration in the fuel feed of ammonia fueled engines in the engine community, this study discusses this question from the perspective of laminar flame speed (LFS), because it is closely related to reactivity, diffusivity, and exothermicity, which is a macroscopic parameter of premixed combustion and directly affects the efficiency and emissions of spark ignition engines. Specifically, the required proportion of hydrogen blended with ammonia is determined by comparing the NH3/H-2 reaction time scale with the millisecond combustion time scale in typical engines. The results show that high temperature enhances the LFS of ammonia, hydrogen and their mixtures, while pressure has an inhibitory effect. In addition, increasing the compression ratio and avoiding fuel-lean operation are effective ways to improve the performance of ammonia combustion with less hydrogen. Considering the high required hydrogen consumption rate and the full load conditions that guarantee high combustion efficiency, off-road application may be a suitable scenario for ammonia-hydrogen engines. Before applying ammonia to automobiles, the technology for onboard hydrogen production should be effectively developed.

Performance Modeling and Analysis of Hydrogen-Fueled Aero-Engines

Transient Modeling and Performance Analysis of Hydrogen-Fueled Aero Engines

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Numerical Simulation on Operating Characteristics of Hybrid Compressed-air and Fuel Engine

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

An Adaptive Modeling Method of Hydrogen-fueled Turbojet Engine

0-D Dynamic Performance Simulation of Hydrogen-Fueled Turboshaft Engine

Simulation and Analysis of Hydrogen-fueled Engine Combustion

Modeling of Hydrogen Combustion from a 0D/1D Analysis to Complete 3D-CFD Engine Simulations

Computational Investigation of Combustion, Performance, and Emissions of a Diesel-Hydrogen Dual-Fuel Engine

Research on Hydrogen-Fueled Turbojet Engine Control Method Based on Model-Based Design

Numerical Simulation of HCNG Engine on GT-Power

An Advanced High Dimensional Model Representation Approach for Internal Combustion Engine Modeling and Optimization

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Modeling and Simulation of a New Hybrid Compressed-Air and Fuel Engine Concept

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

High-Performance Hydrogen-Fueled Internal Combustion Engines: Feasibility Study and Optimization via 1D-CFD Modeling

Optimal Performance and Preliminary Parameter Matching for Hydrogen Fuel Cell Powertrain System of Electric Aircraft

Optimizing Hydrogen Kinetics for Zero-Carbon Emission Transport Technologies

Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions

Utilization of hydrogen-diesel blends for the improvements of a dual-fuel engine based on the improved Taguchi methodology