Abstract:In the last few years, broadband and switchable frequency selective surfaces (FSSs) absorber/reflector are of great importance in different areas such as stealth system, EM interference, EM compatibility, and so on. In this paper, to obtain a switchable frequency selective surfaces absorber/reflector in different states, a broadband and switchable absorber using an absorb/reflective FSS is presented. The top layer of the proposed switchable absorber is a periodic arrangement of square loops loaded with PIN diodes on a dielectric substrate which has a sufficient mechanical strength to hold up all the units, and under the square loops there are honeycomb of a certain thickness and a thin layer of metal. The structure has been characterized with the full-wave analysis and shows good absorption/reflection switching performance. Intrinsic impedance of proposed structure has also been investigated to explain the switching and the broadband absorption mechanisms of the structure. The working frequency band of the switchable absorbing structure is 2.5 ~ 5.5 GHz, and it switches states by changing the bias voltage. Biasing at different voltages to turn ON and OFF the diodes, the FSS structure can switch freely between absorption and reflection state. In ON state, the switchable FSS has two states working as a wideband absorber and the reflectivity in 2.5 ~ 5.5 GHz is below -10 dB, while in OFF state it has fine reflective property. In addition, inductances are used to connect each element of the structure to achieve the purpose of broadband isolation. Simulation and measurement results demonstrate the performance of the proposed structure.

Wideband Water-Based Switchable Metasurface Absorber/Reflector

An Ultra-Wideband and Translucent Metasurface Absorber Based on Water

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Multi-functional tunable ultra-broadband water-based metasurface absorber with high reconfigurability

Switchable Reflective Point Design for Ultrabroadband Microwave Absorber

Reconfigurable Water-Based Metamaterial with Hybrid Mechanism for Backward-Scattering Reduction

Water-based Metamaterial with Thermal Tunability for Dual-band Absorption

Design of a Broadband and Switchable Absorber Using an Absorb/Reflective FSS

Water-cube-based Metasurface for Broadband and Tunable Microwave Absorption

Broadband Microwave Absorption Utilizing Water-Based Metamaterial Structures

Transparent Absorption-Diffusion-integrated Water-Based All-Dielectric Metasurface for Broadband Backward Scattering Reduction

Water‐Resonator‐Based Metasurface: an Ultrabroadband and Near‐Unity Absorption

Water-based Metamaterial Absorber for Broadband Electromagnetic Wave Absorption

Water Metamaterial for Ultra-Broadband and Wide-Angle Absorption.

Design of a broadband multifunctional switchable absorber/reflector based on active frequency selective surfaces

Water-based metasurface with continuously tunable reflection amplitude

Narrow/Broad-Band Absorption Based on Water-Hybrid Metamaterial

Switchable Frequency Selective Surfaces Absorber/reflector for Wideband Applications

Ultra‐Broadband, Tunable, and Transparent Microwave Meta‐Absorber Using ITO and Water Substrate

A reconfigurable ultra-broadband transparent absorber combined with ITO and structural water

Ultra Broadband Electromagnetic Wave Absorbing and Scattering properties of Flexible Sandwich Cylindrical Water-based Metamaterials