Abstract:Abstract When the fine-blanking process is used, secondary grinding or processing can be omitted because the shear surface of fine-blanking parts can achieve almost zero fracture zone requirements. The primary objective of the fine-blanking process is to reduce the fracture zone depth and die roll zone width. This study used a 2.5-mm-thick central processing unit (CPU) thermal heat spreader as an example. Finite element analysis software was employed to simulate and optimize the main eight process parameters that affect the fracture zone depth and die roll zone width after fine-blanking: the V-ring shape angle, V-ring height of the blank holder, V-ring height of the cavity, V-ring position, blank holder force, counter punch force, die clearance, and blanking velocity. Simulation analysis was conducted using the L 18 (2 1 × 3 7 ) Taguchi orthogonal array experimental combination. The simulation results of the fracture zone depth and die roll zone width were optimized and analyzed as quality objectives using Taguchi’s smaller-the-better design. The analysis results revealed that with fracture zone depth as the quality objective, 0.164 mm was the optimal value, and counter punch force made the largest contribution of 25.89%. In addition, with die roll zone width as the quality objective, the optimal value was 1.274 mm, and V-ring height of the cavity made the largest contribution of 29.45%. Subsequently, this study selected fracture zone depth and die roll zone width as multicriteria quality objectives and used the robust multicriteria optimal approach and Pareto-optimal solutions to perform multicriteria optimization analysis. The results met the industry’s fraction zone depth standard (below 12% of blank thickness) and achieved a smaller die roll zone width.

Effect of the Individual Layer Thickness and Relative Blanking Clearance on Micro-Blanking for Cu/Nb Multilayer Composite Sheets

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Investigation on Effect of Ultrasonic Vibration on Micro-Blanking Process of Copper Foil

Investigation into High-Frequency-Vibration Assisted Micro-Blanking of Pure Copper Foils

Size Effects in Micro Blanking of Metal Foil with Miniaturization

Blanking Clearance and Grain Size Effects on Micro Deformation Behavior and Fracture in Micro-Blanking of Brass Foil

Numerical simulation and optimization of fine-blanking process for copper alloy sheet

Influence laws of blanking conditions on micro punching process of brass foil

Microstructural Evolution and Mechanical Behavior of Cu/Nb Multilayer Composites Processed by Accumulative Roll Bonding

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Failure and forming quality study of metallic foil blanking with different punch-die clearances

Effect of Al2Cu constituent layer thickness discrepancy on the tensile mechanical behavior of Cu/Al2Cu/Al layered composites: A molecular dynamics simulation

Experimental Study of Effects of Blanking Clearance and Stamping Speed on the Quality of Blanking Pieces

Effects of sheet thickness and material on the mechanical properties of flat clinched joint

Finite element simulation of the effect of clearance on the forming quality in the blanking process

Effect of grain size on fine micro-blanking for Inconel 718 foil

Numerical simulation of fine-blanking process using a mixed finite element method

Effect of Ultrasonic Vibration on Deformation in Micro-blanking Process with Copper Foil

A Microstructure-Based Macro-Micro Multi-Scale Fine-Blanking Simulation of Ferrite-Cementite Steels

Thin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (Gnss)-Reinforced Copper-Matrix-Laminated Composites