Abstract:Heat recovery ventilation, as a kind of energy saving ventilation, can alleviate the contradiction between heating energy consumption and ventilation. The application of heat recovery ventilation system for residential buildings has turned out that it has the problems of low ventilation efficiency and high cost when applied in the livestock house. A modified heat recovery ventilation system for livestock house was designed in this study, and the efficiency of heat recovery ventilation equipment under 3 different operating conditions was tested to find out the optimal operation conditions. In the first operating condition, the temperature difference inside and outside the livestock house was 12.08℃. The size of plate-fin heat exchanger was 500 mm× 500 mm× 250 mm. Fresh air supply adopted a positive pressure way and exhaust air used a negative pressure way. When the approach velocities were 1.05 and 0.86 m/s, the fresh air temperature through the heat exchanger increased by 1.93 and 2.79℃, the sensible heat recovery efficiency was 35.88% and 43.63%, the heat recovery load was 0.16 and 0.19 kW, and the coefficient of performance was 1.37 and 1.61, respectively. The sensible heat efficiency under both approach velocities was far below the energy saving standard in winter (≥65%). In the second operating condition, 2 plate-fin heat exchangers were in cascade connection, and the fresh air went through the 2 plate-fin heat exchangers in sequence. The size of heat exchanger, fan type and ventilation pattern were the same with the first condition. In this way, when the temperature difference between inside and outside was 10.49℃, the fresh air temperature passing through the first heat exchanger increased by 2.59℃. The sensible heat recovery efficiency was 52.11%, and meanwhile the heat recovery load and the coefficient of performance were respectively 0.39 kW and 3.26. The poor performance of the second heat exchanger showed that the two heat exchangers in series for livestock house were unnecessary. In the third configuration condition, both matching parameters and connection ways between heat exchanger and fans were optimized. The plate heat exchanger and the axial flow fan with low noise and large volume were used. The heat exchanger size was 600 mm× 600 mm× 600 mm. Both fresh air supply and exhaust air used a negative pressure way. When the temperature difference between inside and outside was 12.12℃ and the approach velocity was 4 m/s, the fresh air temperature increased by 8.23℃. The sensible heat recovery efficiency was 69.9%, and the coefficient of performance was 8.0, meeting the national energy-saving standard requirement. It is concluded that the heat recovery ventilation aimed to improve the balance between heat recovery efficiency and ventilation efficiency can meet the requirement of large volume ventilation and energy saving in the livestock house. So it is of great value to optimize the parameter and structure of heat recovery ventilation system for livestock house.

How to Achieve Energy Efficiency in Buildings Without Compromising Indoor Air Quality: A Case Study on Enthalpy Exchangers

Energy Efficiency Optimization Strategies for University Research Buildings with Hot Summer and Cold Winter Climate of China Based on the Adaptive Thermal Comfort

A Study on Enthalpy Exchanger with Modified Functional Layers Based on Chloride

Heat recovery analysis of a fixed plate energy recovery ventilator

Application of Entransy in the Analysis of HVAC Systems in Buildings

Experimental Study on the Efficiency of Cross and Counter Flow Plate Type Air to Air Heat Exchanger

OPTIMIZATION ANALYSIS ON ENTHALPY RECOVERY DEVICE USING LIQUID DESICCANT

Analysis on application of air conditioning system with heat recovery to hospital buildings

Experimental Analysis and Performance Optimization of a Counter-Flow Enthalpy Recovery Device Using Liquid Desiccant

Advances in heat exchangers for heat and mass transfer: a review

Characterization Of District Heating Energy Use Of A Typical Residential Building In North China

Energetic analysis of an air handling unit combined with enthalpy air-to-air heat exchanger

Heat recovery effect of heat recovery ventilation system with heat exchanger-fan for livestock house

Recuperative Heat Exchanger-Utilizer Thermodynamic Modes in Low Capacity Supply-and-Exhaust Ventilation Unit

Performance Investigation of Terminal Handling Process in Air-Conditioning System from the Perspective of Entransy Dissipation

Performance analysis on single-channel residential bidirectional ventilation heat recovery device

Cooling energy efficiency and classroom air environment of a school building operated by the heat recovery air conditioning unit

Study on the thermal performance of the cross-flow plate heat exchangers

Integrated system of exhaust air heat pump and advanced air distribution for energy-efficient provision of outdoor air

Energy saving and thermal comfort problems of residential buildings which adopt concentrated HVAC system

Theoretical and experimental investigation of a heat pipe heat exchanger for energy recovery of exhaust air