Abstract:A Crossed‐Fabry‐Perot‐Cavity OPA (XOPA) scheme is proposed and experimentally demonstrated. The pump‐to‐signal conversion efficiency of up to 56.28% and gain bandwidth of 120 nm are simultaneously achieved with signal pulses at 808 nm and pump 532 nm. The excellent performance makes XOPA universal potential utilization in laser systems of extreme intensity, few‐cycle duration, and internal confinement fusion drivers. Optical parametric amplification (OPA) is a promising method of producing extremely intense light. A new OPA scheme with comprehensively high performance is urgently required for future development. In this study, an amplification scheme known as crossed‐Fabry‐Perot‐cavity OPA (XOPA) is proposed. It is based on the principle of periodic idler elimination, which prevents energy back‐conversion among the three coupling waves, resulting in a monotonically increasing overall conversion efficiency. Using a signal at 808 nm and a pump at 532 nm, a chirped pulse XOPA is experimentally demonstrated with a conversion efficiency of 56.28% and a gain bandwidth of 120 nm. The measured pulse duration after compression is 19.2 fs, which is comparable to the Fourier‐transform‐limited 16.8 fs. Further investigations revealed several advantages. Stable pulse shaping in spatial, temporal, and frequency domains is realized by a spatiotemporally modulated pump. Pulse contrast adjustability on the front edge of the signal is verified in the XOPA of different Fabry‐Perot cavity lengths. These results indicate astringency and precise regulation of output in nonlinear processes. Considering numerous crystals suitable for noncollinear configurations from the near‐infrared to mid‐infrared regions, XOPA has a universal potential application in laser systems with extreme intensity, few‐cycle duration, and internal confinement fusion drivers.

TFLN-based Nondegenerate Optical Parametric Amplifier with High Gain, High Saturated Optical Power and Linear Wavelength Tunability

High-gain optical parametric amplification with continuous-wave pump using domain-engineered thin film lithium niobate waveguide

Optimizing for a Near Single-Mode Type-0 Optical Parametric Amplifier in Nanophotonics

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

PPLN-based Optical Parametric Amplification for Wideband WDM Transmission

Integrated Broadband Lithium Niobate Optical Parametric Amplifier

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Fiber-Amplified Pulses Beyond the Gain Narrowing Limit for Seeding an OPA

PPMgLN-Based High-Power Optical Parametric Oscillator Pumped by Yb $^{{\bm 3}{\bm +}}$-Doped Fiber Amplifier Incorporates Active Pulse Shaping

Fiber-Optic Parametric Amplifier and Oscillator Based on Intracavity Parametric Pump Technique

Optical Parametric Amplification in Crossed Fabry‐Perot Cavities

Large Aperture PPMgLN Based High-Power Optical Parametric Oscillator at 38 Μm Pumped by a Nanosecond Linearly Polarized Fiber MOPA

High-power PPMgLN-based Optical Parametric Oscillator Pumped by a Linearly Polarized, Semi-Fiber-coupled Acousto-Optic Q-switched Fiber Master Oscillator Power Amplifier.

Performance Studies of High-Power Optical Parametric Oscillators Pumped by a Pulsed Fiber Laser

Few-mode Optical Parametric Amplification in a Multiple Quasi-Phase-matched Thin-Film Lithium Niobate Waveguide

Tunable femtosecond optical parametric amplifier with weak CW seeding

Ultrabroadband Tunable OPA Design Using a Spectrally Broadened Pump Source.

Two-pump fiber optical parametric amplifier with cascaded two-section fiber

Temperature- And Wavelength-Insensitive Parametric Amplification Enabled By Noncollinear Achromatic Phase-Matching

A CW Seeded Femtosecond Optical Parametric Amplifer

91.1 kW, 5.3 ns compact Mid-infrared Optical Parametric Amplification based on PPMgLN