Abstract:Here we report a high power, pulsed optical parametric oscillator (OPO) at 3.5 mu m by using a MgO:PPLN crystal as the gain medium. The OPO itself was pumped by a semiconductor diode-seeded, Yb3+-doped fiber Master Oscillator Power Amplifier (MOPA) operating at 1062nm. An OPO output power as high as 11W at an overall slope efficiency of 67% was achieved, with nearly 2.7W and 8.2W of optical power obtained at 3.5 mu m and 1.5 mu m respectively. Due to the fast response time of the external modulator, it is possible to implement active pulse shaping on a nanosecond time-scale. Using adaptive pulse shaping of the seed laser (using an external modulator) we demonstrated a reduction in the impact of dynamic gain saturation and optical Kerr/Raman nonlinearities within the fibre MOPA obtaining shaped signal and idler pulses at the OPO output and reduced spectral bandwidths. We have also investigated the dependence of the OPO build-up time and energy transfer efficiency on pump pulse peak power and shape. The build-up time shows an exponential dependence on the pulse peak power and as expected decreases with an increase in pulse peak power. Analyzing the shift in spectral peak at 1.5 mu m it is possible to estimate the internal temperature of the crystal for various pump powers. Our experiments were pump-power limited and considerable scope remains for further power-scaling of the OPO output using this approach.

Temperature Insensitive, High-Power Cascaded Optical Parametric Oscillator Based on an Aperiodically Poled Lithium Niobate Crystal.

High-efficiency, high-repetition-rate, temperature-tuning optical parametric oscillator based on periodically poled MgO-doped lithium niobate

Efficient Parametric Conversion from 106 to 38 Μm by an Aperiodically Poled Cascaded Lithium Niobate

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

High-power PPMgLN-based Optical Parametric Oscillator Pumped by a Linearly Polarized, Semi-Fiber-coupled Acousto-Optic Q-switched Fiber Master Oscillator Power Amplifier.

PPMgLN-Based High-Power Optical Parametric Oscillator Pumped by Yb $^{{\bm 3}{\bm +}}$-Doped Fiber Amplifier Incorporates Active Pulse Shaping

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

Efficient parametric conversion from 1.06 to 3.8 μm by an aperiodically poled cascaded lithium niobate.

Widely tunable high power OPO based on a periodically poled MgO doped lithium niobate crystal

Performance Studies of High-Power Optical Parametric Oscillators Pumped by a Pulsed Fiber Laser

A Fiber Laser Pumped Dual-Wavelength Mid-Infrared Optical Parametric Oscillator Based on Aperiodically Poled Magnesium Oxide Doped Lithium Niobate

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Temperature Tunable Infrared Optical Parametric Oscillator with Periodically Poled LiNbO3

Externally Modulated, Diode Seeded Yb3+-Doped Fiber Mopa Pumped High Power Optical Parametric Oscillator

High-power Multichannel PPMgLN-based Optical Parametric Oscillator Pumped by a Master Oscillation Power Amplification-Structured Q-switched Fiber Laser

High‐power, Continuous‐wave Optical Parametric Oscillator Based on MgO:sPPLT Crystal

High-power nanosecond optical parametric oscillator based on a long LiB3O5 crystal

Temperature- And Wavelength-Insensitive Parametric Amplification Enabled By Noncollinear Achromatic Phase-Matching

PPMgLN-based high power OPO pumped by double end pumped Nd:YVO4 laser

A Compact and High Efficiency Intracavity OPO Based on Periodically Poled Lithium Niobate

Large Aperture PPMgLN Based High-Power Optical Parametric Oscillator at 38 Μm Pumped by a Nanosecond Linearly Polarized Fiber MOPA