A framework for optimisation and techno-economic analysis of CO2 pressurisation strategies for pipeline transportation

Anders Andreasen,Maria Bonto,Fernando Montero
DOI: https://doi.org/10.26434/chemrxiv-2024-hpnbt
2024-08-27
Abstract:– This paper presents a framework for optimisation and techno-economic analysis of various pressurisation pathways for CO2 pipeline transportation. The pressurisation pathways include a conventional compression only case from initial to final pressure, a sub-critical compression part followed by cooling, liquefaction and pumping and also a super-critical compression part followed by cooling and dense phase pumping. The presented framework is developed based on open-source components and information available in the public domain. The framework includes a high level of flexibility to study variations in initial and final pressures, inclusion of inter-stage pressure drop, inter-stage cooling temperature, liquefaction/pumping pressure, among others. The implemented methods i.e. the thermodynamic and economic models applied, are rigorously validated and bench-marked against literature data. Contrary to former studies that focus mainly on reduction of the work required for pressurisation, the presented method includes additional capabilities to assess CAPEX, OPEX and the levelised cost of CO2 compression. The analysis shows that in some cases the minimum levelised cost does not coincide with the minimum work. It is also demonstrated that for some cases the super-critical compression/cooling/pumping case and the sub-critical compression/cooling/liquefaction/pumping pathways provide optimal levelised cost compared to a multi-stage compression only case.
Chemistry
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the techno - economic analysis of optimizing and conducting the pumping strategy for carbon dioxide (CO₂) pipeline transportation. Specifically, the authors have developed a framework to evaluate the impact of different pumping routes on the efficient transportation of CO₂ from the capture site to the final destination (such as underground storage repositories, various electro - fuel production facilities or enhanced oil recovery sites, etc.). ### Main problems: 1. **Optimizing pumping routes**: Research different pumping routes (including traditional compression, sub - critical compression plus cooling/liquefaction/pumping, super - critical compression plus cooling/dense - phase pumping) to find the most effective energy - consumption - minimizing and cost - minimizing solutions. 2. **Combining technical and economic evaluations**: Not only focus on reducing the power consumption required for pumping, but also consider capital expenditure (CAPEX), operating expenditure (OPEX) and the levelized cost of CO₂ compression (LCOCC), thus providing a comprehensive techno - economic analysis. 3. **Parameter flexibility**: This framework is highly flexible and can study the influence of factors such as the change of initial and final pressures, pressure losses in intermediate stages, intermediate cooling temperatures, liquefaction/pumping pressures, etc. ### Solutions: - **Model development**: Developed a set of flexible simulation tools based on open - source components and public - domain information. - **Method verification**: The thermodynamic and economic models used have been rigorously verified and benchmarked against literature data. - **Multivariable analysis**: Explore the optimal pumping routes under different conditions by adjusting multiple parameters. ### Key findings: - **The lowest levelized cost does not necessarily correspond to the lowest power consumption**: In some cases, although the power consumption is not the lowest, the levelized cost may be the lowest when considering CAPEX and OPEX comprehensively. - **Optimal routes under specific conditions**: For some cases, the super - critical compression/cooling/pumping route or the sub - critical compression/cooling/liquefaction/pumping route provides a better levelized cost compared to the multi - stage compression route. In summary, this research aims to provide a comprehensive and flexible techno - economic analysis framework for CO₂ pipeline transportation, helping decision - makers choose the optimal pumping strategy to achieve efficient and economical CO₂ transportation.