Abstract:A new potassium-based adsorbent for CO2 capture with Al aerogel used as support is proposed in this work. The adsorbents with different surface modifiers (tetraethyl orthosilicate (TEOS) and trimethyl chlorosilane (TMCS)) and different K2CO3 loadings (10%, 20%, 30% and 40%) were prepared by sol-gel and iso-volume impregnation processes with ambient pressure drying. The CO2 adsorption performance of the adsorbents were tested by a fixed-bed reactor, and their adsorption mechanisms were studied by scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and X-ray fluorescence spectrometry (XRF). Furthermore, the adsorption kinetics and the cycling performance were investigated. The results show that using TEOS to modify the wet gel can introduce SiO2 to increase the strength of the skeleton. On the basis of TEOS modification, TMCS can further modify –OH, thus effectively avoiding the destruction of aerogel structure during ambient drying and K2CO3 impregnation. In this work, the specific surface area and specific pore volume of Al aerogel modified by TEOS + TMCS are up to 635.32 cm2/g and 2.43 cm3/g, respectively. The aerogels without modification (Al-B), TEOS modification (Al/Si) and TEOS + TMCS modification (Al/Si-TMCS) showed the best CO2 adsorption performance at 20%, 30% and 30% K2CO3 loading, respectively. In particular, the CO2 adsorption capacity and K2CO3 utilization rate of Al/Si-TMCS-30K are as high as 2.36 mmol/g and 93.2% at 70 degrees Celsius (°C). Avrami’s fractional order kinetic model can well fit the CO2 adsorption process of potassium-based adsorbents. Al-B-20K has a higher apparent activation energy and a lower adsorption rate during the adsorption process. After 15 adsorption-regeneration cycles, Al/Si-TMCS-30K maintain a stable CO2 adsorption capacity and framework structure, while the microstructure of Al/Si-30K is destroyed, resulting in a decrease in its adsorption capacity by nearly 30%. This work provides key data for the application of Al aerogel in the field of potassium-based adsorbent for CO2 capture.

CO2 Capture by ZSM-5 with Varied Si/Al Molar Ratios: Isothermal Adsorption Capacity of CO2 Vs Dynamic CO2 Adsorption Capacity

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Synthesis of cobalt-silicon molecular sieve with excellent CO2/N2 adsorption selectivity for dynamic CO2 capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Enhancement of Carbon Dioxide Adsorption Over Alkali-cations Borosilicate ZSM-5 Zeolite

Regulating the Si/Al ratio of GIS zeolite with bulky primary particles for selective CO 2 capture from hydrocarbons

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Adsorption Equilibria of CO2, CH4, N2, O2, and Ar on High Silica Zeolites

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Performance Evaluation of Static and Dynamic CO2 Adsorption from Synthetic Gas Condensates Using Zinc Oxide, Silicon Dioxide and Zeolite 13X

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach

Adsorption of CO2 on ZSM-5 and Cu-MOF at room temperature and low pressure conditions for Carbon Capture and Storage (CCS) application

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

K2CO3-Impregnated Al/Si Aerogel Prepared by Ambient Pressure Drying for CO2 Capture: Synthesis, Characterization and Adsorption Characteristics.

Preparation of ZSM-5 molecular sieve modified by kaolin and its CO2 adsorption performance investigation

Kinetic analysis for cyclic CO 2 capture using lithium orthosilicate sorbents derived from different silicon precursors.

CO2 capture properties of lithium silicates with different ratios of Li2O/SiO2: an ab initio thermodynamic and experimental approach

Molecular Simulation of Adsorption of CO2 from a Combustion Exhaust Mixture of Zeolites with Different Topological Structures