Abstract:Compaction is a crucial process in road construction and the compactness is an important parameter in determining the road foundation quality. Traditional compaction monitoring methods are based on different principles. The major principle of these techniques is detecting the water content and bulk density of the soil, and then calculating the dry density and the compactness. The disadvantages are laborious, low accuracy, low efficiency and costly for large scale measurement. These drawbacks may limit their application in certain aspects. In this paper, a novel electromechanical impedance (EMI) based compactness measuring sheet (CMS) for soil compactness monitoring was proposed. The proposed CMS was fabricated by attaching a circular piezoceramic patch onto a circular sheet with a larger size. Eight round CMSs with a diameter of 150 mm, 100 mm, 80 mm, 50 mm were fabricated in this experimental study. Among them, four CMSs were embedded into soil and subjected to compression tests to simulate the increased soil compaction. In this study, the conductance signatures of the proposed CMS were collected and analyzed during the increasing soil compaction process. Experimental results demonstrated that all the peak magnitudes in the conductance signatures in the selected frequency range of 160 kHz to 310 kHz were reduced with the increase of soil compaction. It showed that some specific frequencies shifted to the right side during the compaction process. The variations in the conductance signatures were then quantified with the aid of three statistical metrics. These metrics include root mean square deviation (RMSD), mean absolute percentage deviation (MAPD), and correlation coefficient deviation (CCD). Through calculation, all these metrics increase with the increase of soil compaction, which can be employed as indicators in the soil compaction process. To obtain more insight into CMS electromechanical system, the finite element analysis were also performed to study the E-I response. The simulation results well verified the experimental results. This preliminary study has verified that the proposed EMI based CMS is feasible and effective in monitoring soil compactness and shows a promising application prospect.

A Feasibility Study on EMI Techniques and Disc-Shaped PZT Sensors for Strength Monitoring of Cement-Stabilized Loess

Embeddable Piezoelectric Sensors for Strength Gain Monitoring of Cementitious Materials: the Influence of Coating Materials

Monitoring of Compressive Strength Gain in Mass Concrete Using Embedded Piezoelectric Transducers

Novel Methodology on Direct Extraction of the Strength Information from Cementitious Materials Using Piezo-Sensor Based Electromechanical Impedance (EMI) Method

Electro-mechanical impedance technique for concrete strength monitoring: three-dimensional model development and experimental verification

Evaluation the Compressive Strength of the Cement Paste Blended with Supplementary Cementitious Materials Using a Piezoelectric-Based Sensor

Monitoring of the Strength Gain of Concrete Using Embedded Pzt Impedance Transducer

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

Embedded piezoelectric transducers based early-age hydration monitoring of cement concrete added with accelerator/retarder admixtures

Strength Monitoring of Concrete Based on Embedded PZT Transducer and the Resonant Frequency

Trial Field Implementation of Piezoelectric Sensing Technique for In-Place Concrete Evaluation

Interfacial Effect on Quantitative Concrete Stress Monitoring Via Embedded PZT Sensors Based on EMI Technique

Mechanism for Using Piezoelectric Sensor to Monitor Strength Gain Process of Cementitious Materials with the Temperature Effect

PZT-Based Soil Compactness Measuring Sheet Using Electromechanical Impedance

Embedded 3d Electromechanical Impedance Model for Strength Monitoring of Concrete Using A Pzt Transducer

Monitoring the Early Strength Development of Cement Mortar with Piezoelectric Transducers Based on Eigenfrequency Analysis Method

Study on Monitoring and Estimating Soil Physical Properties Using Piezoceramic Transducer

Instantaneous monitoring the early age properties of cementitious materials using PZT-based electromechanical impedance (EMI) technique

A Study of Concrete Slab Damage Detection Based on the Electromechanical Impedance Method

Influence of Axial Load on Electromechanical Impedance (EMI) of Embedded Piezoceramic Transducers in Steel Fiber Concrete.

Monitoring the curing process of in-situ concrete with piezoelectric-based techniques – A practical application