Abstract:It is critical to develop an accurate non-destructive testing (NDT) methods to evaluate the real-time concrete strength gain due to the fast pace of construction. Among the NDTs for concrete strength monitoring, piezoelectric materials based electromechanical impedance (EMI) method has attracted much attention recently. Some statistical approaches are proposed for impedance signal processing, such as root mean square deviation (RMSD) and mean absolute percentage deviation (MAPD). However, these methods require the baseline value for calculation, which is not convenient, particularly for the very early strength gain monitoring. In this study, three features extracted directly from phase angle spectrum, including resonant frequency of the first local phase angle peak (PARF), local phase angle peak value (PA), and the corresponding width of half-prominence (HPW) are employed as indicators to monitor the strength gain process. Among these three indicators, the first peak of phase angle resonant frequency (PARF) is found the most reliable. The PARF index can directly be obtained from the impedance spectrum without baseline calculation. Five types of different cement mortar with various water-to-cement ratios from 0.38 to 0.46 were prepared. The EMI test and conventional cubic testing (ASTM 109) were conducted concurrently at a very early age (4th to 8th hour) and an early age (1st, 3rd, and 7th day). To examine the correlation between the compressive strength obtained and the EMI-PARF indices, a linear least-squares regression analysis was performed. Furthermore, the finite element analysis (FEA) was conducted to discuss the relationship between the features obtained from the phase angle spectrum and the stiffness of the host structure. The PARF index exhibits a high correlation with the mechanical properties of cementitious materials. Both experiments and FEA results ascertain that piezoelectric-based EMI coupled with the PARF index is a reliable method for in-place strength gain evaluation of cementitious materials.

Instantaneous monitoring the early age properties of cementitious materials using PZT-based electromechanical impedance (EMI) technique

Novel Methodology on Direct Extraction of the Strength Information from Cementitious Materials Using Piezo-Sensor Based Electromechanical Impedance (EMI) Method

Evaluation the Compressive Strength of the Cement Paste Blended with Supplementary Cementitious Materials Using a Piezoelectric-Based Sensor

Embeddable Piezoelectric Sensors for Strength Gain Monitoring of Cementitious Materials: the Influence of Coating Materials

Embedded piezoelectric transducers based early-age hydration monitoring of cement concrete added with accelerator/retarder admixtures

Monitoring of the Strength Gain of Concrete Using Embedded Pzt Impedance Transducer

Strength Monitoring of Concrete Based on Embedded PZT Transducer and the Resonant Frequency

A Feasibility Study on EMI Techniques and Disc-Shaped PZT Sensors for Strength Monitoring of Cement-Stabilized Loess

Monitoring of Compressive Strength Gain in Mass Concrete Using Embedded Piezoelectric Transducers

An electromechanical impedance measurement-based solution for monitoring fresh concrete maturity

Monitoring the Early Strength Development of Cement Mortar with Piezoelectric Transducers Based on Eigenfrequency Analysis Method

Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors

Monitoring the curing process of in-situ concrete with piezoelectric-based techniques – A practical application

Comparative analysis of very-early age hydration process: LC3 vs. conventional and blended cement pastes using embedded piezo sensors

Monitoring of Strength Gain in Concrete Using Smart Pzt Transducers

A Baseline-Free Electromechanical Impedance Resonance Method for Measuring the Modulus of Elasticity of Concrete Cubes Using Surface-Bonded PZT Patches

Embedded 3d Electromechanical Impedance Model for Strength Monitoring of Concrete Using A Pzt Transducer

Non-Destructive Characterization of Pore Structure and Chloride Diffusion Coefficient of Cementitious Materials with Modified Non-Contact Electrical Resistivity Method

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

In-situ Crack Propagation Monitoring in Mortar Embedded with Cement-Based Piezoelectric Ceramic Sensors

A Study of Concrete Slab Damage Detection Based on the Electromechanical Impedance Method