Abstract:The high temperature gas-cooled pebble-bed modular reactor (HTR-PM), considered as the first pebble-bed modular type demonstration nuclear power plant in the world with the safety characteristics of the fourth-generation nuclear energy system, has been constructed in Shidao Bay, Shandong Province, China. It connected to the grid first time on December 20, 2021. The inherent safety of HTR-PM largely depends on the adoption of the tristructural-isotropic (TRISO) coated particle as the nuclear fuel, in which the SiC layer can retain nearly all the fission products. However, there are still small amounts of nuclides which can diffuse from the intact or defective TRISO coated particles at a high temperature. Along with the radionuclides produced from the fission reaction of uranium contamination in the matrix graphite and neutron activation reaction in the core, they dominate the radioactivity in the primary coolant. The radiation monitoring on the radioactive level of the primary coolant is essential to assess the fuel performance in the reactor core. An on-line gross γ monitoring instrument was designed to monitor the real-time variations of radioactivity in the primary circuit, which can provide a direct reflect of the fuel element performance in the core. It adopted NaI detector, which was aligned with the center of the primary pipe. While, in the actual installation environment, the center of the pipeline to be measured was deviated from the detector with a maximum distance of 37 mm. Obviously, this deviation will decrease the detection efficiency of the instrument. We adopted the MCNP (Monte Carlo N Particle Transport Code) to calculate the detection efficiency under normal condition, and implemented a sensitivity analysis of the influence of the pipe deviation on the detection efficiency of the instrument. Current quantitative calculations can provide valuable guidance for the on-line radiation monitoring instrument installation in the nuclear power plant.

Minimum detectable activity concentration of online monitoring instrument in primary circuit of HTR-PM based on Monte Carlo simulation

Monte Carlo Simulation of Activity Concentration Measurement of Primary Coolant of High-Temperature Gas-Cooled Pebble-Bed Modular Reactor

Design of the Online Gross Γ Monitoring Instrument at the Exit of the Helium Purification System in HTR-PM

INFLUENCE OF INSTALLATION POSITION DEVIATION ON MEASUREMENT RESULTS OF AN ON-LINE RADIATION MONITORING INSTRUMENT IN HTR-PM: A MONTE CARLO

Monte Carlo Studies on the Burnup Measurement for the High Temperature Gas Cooling Reactor

Simulation of HTR 10 anti Compton hpge gamma ray spectrometer with geant4

Prototype studies on the nondestructive online burnup determination for the modular pebble bed reactors

Burnup Measurement Study and Prototype Development in HTR-PM

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Feasibility Studies on the Burnup Measurement of Fuel Pebbles with Hpge Gamma Spectrometer

PARAMETER OPTIMIZATION OF HTR-10 ONLINE BURNUP MEASUREMENT DETECTOR SYSTEM USING META-HEURISTIC ALGORITHMS

DESIGN OF THE IMPORTANT AREA AIRBORNE RADIOACTIVITY MONITORING SYSTEM AND CALCULATION OF THE ALARM THRESHOLD OF HTR-PM

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

DESIGN OF THE GAS SAMPLING AND ANALYZING SYSTEM OF HTR-PM

SMALL LOCA DETECTIONS IN THE PRIMARY CIRCUIT OF HTR-PM BASED ON ESO

Design of the Process and Effluent Radiation Monitoring System of Htr-Pm

Source Term Study on Tritium in HTR-PM: Theoretical Calculations and Experimental Design

Conditioning the gamma spectrometer for activity measurement at very high background

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Uncertainty and Sensitivity Analysis of Filling Fraction of Pebble Bed in Pebble Bed Htr

Feasibility Analysis of Tritium Measurement in the Aqueous Medium Based on a Plastic Scintillating Fiber Array