Abstract:Fiber lasers (FLs) with excellent beam quality, high reliability and compact structure are urgently demanded in the fields of national security and scientific research, such as high-power laser, free-space optical communication, and gravitational wave detection. These applications rely on rare-earth-doped high-gain glass fibers, which play critical roles in FLs. However, the rare earth solubility of commercial silica glass (similar to 10(19) ions/cm(3)) is restricted by its rigid structures. Thus, the active fiber fabricated by silica glass typically has low gain, which becomes a challenge for developing high-performance FLs. Phosphate-based glass is a promising candidate because it has higher solubility of rare earth (similar to 10(21) ions/cm(3)) and larger emission cross-section compared with silica glass. By incorporating fluoride and sulfate into phosphate matrix, the fluoro-sulfo-phosphate (FSP) glass that combines the favorable spectroscopic properties of fluoride and sulfate glasses with the advantages of phosphate glass can be derived. The addition of fluoride reduces the linear and nonlinear refractive indices of phosphate glass, which is advantageous for operating FLs. The maximum phonon energies of fluoride (similar to 500 cm(-1)) and sulfate (similar to 990 cm(-1)) are lower than that of phosphate (similar to 1200 cm(-1)). Therefore. sulfate and fluoride ions can tailor the local structures of rare earth and enhance radiative transition probability, leading to increased optical gain. Herein, this work systemically investigated the FSP glasses with the compositions of R2SO4-AlF3-RPO3/Zn(PO3)(2) (R=Li. Na. K). Their glass-forming regions were determined under the guidance of thermodynamic calculation method. The dependence of properties on structure of the FSP glass was analyzed by solid-state nuclear magnetic resonance (NMR). Raman spectra, differential scanning calorimetry (DSC), durability test. etc. Then the luminescent properties of Er3+/Yb3+ co-doped FSP laser glasses were characterized. Optimized laser glass was fabricated into high-gain fibers and an FL has been demonstrated. The results illustrate that the glass-forming regions of FSP systems can be quickly determined based on the thermodynamic calculation. which provides an effective and predictive method for designing novel laser glasses. Incorporating Zn(PO3)(2) into FSP glass can enhance the interactions between cations and anions and increase the polymerization degree of glass structure, resulting in improved anti-crystallization ability and chemical durability, which is beneficial for preparing large-scale samples and drawing fibers. The Er3+/Yb3+ co-doped FSP laser glasses show excellent spectroscopic properties at similar to 1.5 mu M, which exhibit longer lifetime (5.9-7.5 ms), larger emission cross section (8.5 x10(-21) 9.0 x10(-21) cm(2)) and lower saturation intensity (1.0 x10(7) W m(-2)) than some phosphate, fluorophosphate and telluroborate laser glasses. Er3+/Yb3+ co-doped fiber based on FSP glass shows a net gain of 4.7 dB/cm@1535 nm. An FL with a threshold of similar to 50 mW and a slope efficiency of 11.3% has been demonstrated based on such fiber. Considering its high gain characteristics. the narrow-line-width single-frequency FL and high-repetition-rate ultrafast FL are expected to be realized further.

Prediction of Glass-Forming Regions in AlF3-M(PO3)2-R2SO4-based Poly-Anionic Fluoro-Sulfo-phosphate Glasses

Controllable Competitive Nanocrystallization of La3+-based Fluorides in Aluminosilicate Glasses and Optical Spectroscopy

Structure and Properties of New Fluoro-Sulfo-phosphate Laser Glasses

Erbium-doped fluoro-sulfo-phosphate high-gain laser fiber

Modification of Structure and Properties of Fluoro-Sulfo-sodium Alumino-Phosphate Glass Through Additional Fluorine and Sulfur Agents

PROPERTIES AND CRYSTALLIZATON KINETICS OF AlF3-BASED FLUOPHOSPHATE GLASSES

Predicting spectroscopic properties of quaternary phosphate laser glasses

Phase Separation of Alkaline Earth Fluorosilicate Glass: A Strategy to Suppress Fluoride Evaporation

Structure and Thermal Stability of Novel Fluorophosphate Glasses

Study of Controlling Phase Separation in Yb3+-doped Fluorophosphate Glasses Via Molecular Dynamics Simulations

Formation and structure of Al(PO3)3-containing fluorophosphate glass

A Modified Random Network Model for P2O5–Na2O–Al2O3–SiO2 Glass Studied by Molecular Dynamics Simulations

Theoretical and Experimental Investigation of Al3+ Ion-Suppressed Phase-Separation Structures in Rare-Earth-Doped High-Phosphorus Silica Glasses

Thermodynamic modeling of the structure of alkali aluminophosphate glasses and their ionic conductivity

Structural Origins of BaF2/Ba1 - Xrxf2 + (x)/rf3 Nanocrystals Formation from Phase Separated Fluoroaluminosilicate Glass: A Molecular Dynamic Simulation Study

Quantitative prediction of the glass-forming region and luminescence properties in Tm3+-doped germanate laser glasses

Electrochemical performance study of AlF3-containing lithium phosphate glass electrolytes

Ca<SUP>2+</SUP>/Sr<SUP>2+</SUP>/Ba<SUP>2+</SUP>dependent phase separation, nanocrystallization and photoluminescence in fluoroaluminosilicate glass

Structural characterization of a new fluorophosphotellurite glass system

Insights into the Iron- and Phosphorus-Induced Structural Rearrangements in Sodium Aluminoborosilicate Glasses and Their Impact on Melt Rheology and Crystallization Behavior

Dispersion, ionic bonding and vibrational shifts in phospho-aluminosilicate glasses