Abstract:The traditional tower‐style building (TTSB) is an innovative structural form constructed in modern cities imitating the overall appearance of ancient timber pagodas, and it is an extraordinarily cultured high‐rise construction. The limited stipulations for high‐rise TTSBs in the seismic design code pose challenges in assessing the reliable performance of the unique structure subjected to severe earthquakes. This paper presents the shaking table test and numerical analyses of a 1/15‐scale 13‐story TTSB specimen with an integral tower height of 5.36 m, which is a steel frame‐braced core‐tube structure consisting of seven bright floors (built‐out stories evident from the outside, BF) and six dim floors (built‐in stories not apparent from the outside, DF), with transition columns and stiffening trusses around the exterior perimeter. The experimental results showed that the tested tower‐style building had excellent seismic performance and reliable structural integrity. It only experienced minor damage when subjected to extremely high‐intensity motions. The interstory drift, dynamic strain, and floor acceleration response of the core‐tube region with eccentric steel braces were more significant under severe excitation than those with cross‐centered symmetric steel braces. The vertical reaction increased at the upper floor of the tower under vertical acceleration, and differences in the dynamic response of the middle and upper floors were much more apparent after the test. Moreover, 3D numerical simulation models of the tested tower were established and validated against the test responses. Successively, the validated numerical model was used to investigate the influence of the transition column at different floors on the peak interstory drift response and the relevant strain distribution, and the proposal for a proper position of the transition column was recommended at the end.

Comparative Study of Earthquake Effects on the Canton Tower Based on Full-Scale Measurements

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Health Monitoring And Parameter Identification Of A Tied Arch Bridge Under Excitation Of Wenchuan Earthquake

Operational Modal Analysis of Canton Tower by A Fast Frequency Domain Bayesian Method

Automatic recognation and real-time alarming of eerthquake induced vibration of a tied arch bridge

STUDY ON THE DYNAMIC TIME HISTORY ANALYSIS OF CCCG SOUTH HEADQUARTER BUILDING

Structural Health Monitoring of Shanghai Tower During Different Stages Using A Bayesian Approach

Numerical simulation of the earthquake response for double tower high-rise building with pile-multistoried basements on deep soft sites

Seismic performance evaluation on the south tower structure of Taiyuan Power Co.Office Building

Nonlinear study on the structure-soil-structure interaction of seismic response among high-rise buildings

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

Model updating and seismic response of a super tall building in Shanghai

Fuzzy evaluation method of high-rise structural earthquake damage based on monitoring data

Measurement of environmental vibrations and analysis of dynamic characteristics of tall tower structures

Aftershock monitoring of Wenchuan Earthquake for a residential masonry building

Investigation of the SHM-oriented Model and Dynamic Characteristics of a Super-Tall Building

Spatiotemporal correlation analysis of the dynamic response of supertall buildings under ambient wind conditions

Long‐term building safety assessment from a series of earthquake excitations

Analysis of Yingxian Wooden Tower Undergoing Past and Future Seismic Impacts

Dynamic Analysis of a 600-m-High Supertall Building Subjected to Long-Period Ground Motions, Ordinary Ground Motions and a Super Typhoon: A Comparative Study

AN ASSESSMENT METHOD OF HIGH-RISE STRUCTURAL EARTHQUAKE DAMAGE USING MEASURED FLOOR ACCELERATION MESSAGES