Abstract:Phosphorus removal and recovery from wastewater is crucial for environmental pollution control and sustainable phosphorus fertilizer production. Electrochemical technologies are promising, but disadvantages like high energy consumption remain. Here, we improved the electrochemical system's performance by placing carbon felt in front of the cathode at a distance of 3 mm with a current density as low as 1 A/m2, which separated the reactor into two parts: near the cathode area and bulk solution. The phosphorus removal near the cathode can reach 75 % in 1 h, while it takes 8 h for the bulk solution to achieve 75 % removal efficiency. The main reason for the enhancement was the retention of OH− ions between the cathode and carbon felt with enriched calcium ions, providing an appropriate environment for calcium phosphate precipitation. The functional groups on the carbon felt surface were another reason for the retention of OH− ions. Furthermore, our results show that the carbon felt system has considerable stability under different mass transfer efficiencies. By adjusting the stirring rate, we could control the proportion of precipitation on the carbon felt or cathode, thereby reducing the scaling on the cathode and avoiding significantly reduced removal efficiency. A long-term continuous flow experiment also illustrated this. Interestingly, we observed that the phosphorus removal had a specific correlation with pH and fit an empirical formula. Therefore, we could estimate the removal efficiency by simply measuring the effluent pH of the solution after treatment. In treating real phosphorus-rich wastewater, the carbon felt system removed 63 %–87 % of 1500 mg/L P after 8 h to 48 h treatment at 20 A/m2, respectively, resulting in lower energy consumption (31 kWh/kg P, 8 h) compared to the system without carbon felt (48 kWh/kg P, 8 h). This study provides a simple yet efficient method for enhancing electrochemical phosphorus recovery.

Efficient Phosphorus Recovery from Simulated Phosphoric Acid Wastewater Using a Tailored Dual-Module Flow Electrode Capacitive Deionization (FCDI) Strategy

Highly efficient and selective extraction of phosphorous from wastewater as vivianite in a strategically operated four-chamber flow electrode capacitive deionization

An Energy Efficient Process for Degrading Perfluorooctanoic Acid (PFOA) Using Strip Fountain Dielectric Barrier Discharge Plasma

Efficient and economical removal and recovery of phosphorus via a novel dual-electrode electrochemically induced crystallization process: Performance and crystallization mechanisms

Highly Selective Recovery of Phosphorus from Wastewater via Capacitive Deionization Enabled by Ferrocene-polyaniline-Functionalized Carbon Nanotube Electrodes

Efficient phosphorus removal from ultra-low concentration wastewater by flow-electrode capacitive deionization

Effective electrosorption and recovery of phosphorus by capacitive deionization with a covalent organic framework-membrane coating electrode

Concurrent Nitrogen and Phosphorus Recovery Using Flow-Electrode Capacitive Deionization

Enhanced electrochemically mediated calcium phosphate precipitation for phosphorus recovery simply by carbon felt barrier cathode

Influence of Cell Configuration and Long-Term Operation on Electrochemical Phosphorus Recovery from Domestic Wastewater

Reagentless electrochemically assisted desorption for selective phosphate recovery from wastewater: Proof of concept and mechanism

Recover phosphorus as vivianite using a dual-chamber electrochemical reactor

Sustained Phosphorus Removal and Enrichment through Off-Flow Desorption in a Reservoir of Membrane Capacitive Deionization

Simultaneous treatment of phosphorus and fluoride wastewater using acid-modified iron-loaded electrode capacitive deionization: Preparation and performance

Electrochemically mediated phosphorus and energy recovery from digested effluent

Enhanced recovery of phosphorus from hypophosphite-laden wastewater via field-induced electro-Fenton coupled with anodic oxidation

Emerging electro-driven technologies for phosphorus enrichment and recovery from wastewater: A review

Enhanced phosphorus electrosorption using Fe, N-co-doped porous electrode via capacitive deionization

Electrochemical Recovery of Phosphorus from Simulated and Real Wastewater: Effect of Investigational Conditions on the Process Efficiency

Efficient extraction of phosphorus from food waste biogas digestate ash through two-compartment electrodialysis cell

Capacitive deionization exploiting La-based LDH composite electrode toward energy efficient and selective removal of phosphate