Seismic Analysis and Design of General Self-Centering Braced Frames under Near-Fault Pulse-Type Ground Motions

Yongwei Wang,Yazhou Xie,Zhen Zhou,Qin Xie

DOI: https://doi.org/10.1016/j.jobe.2024.110375

IF: 7.144

2024-01-01

Journal of Building Engineering

Abstract:The general self-centering braces (GSCBs), with a loading stiffness larger than unloading stiffness, have been proposed recently to increase the braces’ energy dissipation capability under earthquake loading. This study investigates the seismic responses of GSCB frames under near-fault pulse-type ground motions and draws recommendations for their crucial design parameters. First, the equations of motion of the multiple-story GSCB frame are established, from which the equivalent multiple degrees of freedom (MDOF) model is developed and verified against the shaking table test results. The seismic responses of GSCB frames under near-fault ground motions and their pulse-type representations are further computed and compared through the derived equivalent MDOF model. Subsequently, parametric and sensitivity studies are conducted to identify the influential parameters associated with the ground motion and the GSCB frame. These parameters provide the data inputs for training an artificial neural network (ANN)-based surrogate model that predicts the seismic demands of the frame without further engaging exhaustive numerical simulations. Finally, a system-level performance index is proposed to design the GSCB to mitigate inter-story drifts, floor accelerations, and the drift concentration effect simultaneously and substantially reduce seismic losses for both structural and non-structural components. By combining the ANN-based surrogate model with the performance index, this study recommends that the GSCB’s post-yielding loading stiffness, αk,2, should be around 0.25, the unloading stiffness, αk,4, should stay near 0.4, and the energy dissipation capacity factor, βf,4, can be designed with a small value of around 0.2.