Engineering of [(2D MoS2/CNTs)1(Ti3C2Tx/CNTs)2]x3 Heterostructures via Layer-by-Layer Spray Deposition: towards tailored high-performing energy storage devices

BEATRIZ MENDOZA SANCHEZ,Tianzhu Liu,Atharva H. Ladole,Eric N. Tseng ,Michael Knapp,Oleksandr Dolotko ,Christopher E. Shuck

DOI: https://doi.org/10.26434/chemrxiv-2024-fpx1z

2024-08-08

Abstract:In this work, we engineer 2D/3D hybrid architectures or heterostructures using cost-effective and scalable layer-by-layer spray deposition methods using 2D MoS2, Ti3C2Tx as building blocks. We assemble heterostructure using a simple-to-complex strategy and systematically optimize the architecture to improve charge storage performance. The architecture and performance of the heterostructures are investigated using imaging and a variety of electrochemical methods. The optimized [(2D MoS2/CNTs)1(Ti3C2Tx/CNTs)2]x3 heterostructure showed remarkable synergystic effects in terms of capacity achieved (up to 800 mAh g-1 at 0.05 A g-1), surpassing the sum of capacities of the constituting building blocks, excellent cycling stability from low to very high rates, e.g. up to 2000 cycles at 5 A g-1 with 100 % Coulombic efficiency and capacity retention. This performance and determined predominant pseudocapacitive charge storage processes suggest applications for Li-ion capacitors. We demonstrated that by adequate tailoring of heterostructures, the drawbacks of individual nanomaterials such as the low cycling stability of 2D MoS2 can be overcome while maintaining the benefits of its high capacity. The manufacturing methods and architecture design principles here established constitute a proof of concept of the powerful potential of heterostructures in surmounting the limitations of capacity, rate performance and cycling stability of current commercial energy storage devices.

Chemistry

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to improve the performance of energy - storage devices, especially in terms of capacity, rate performance and cycle stability, by constructing and optimizing 2D/3D hybrid structures (or heterostructures). Specifically, the author used a cost - effective and scalable layer - by - layer spray deposition method, using two - dimensional molybdenum disulfide (MoS₂) and Ti₃C₂Tₓ as basic building blocks, and introduced single - walled carbon nanotubes (CNTs) as "spacers" to enhance electrical conductivity and electrolyte permeability.

### Main problems:
1. **Limitations of existing energy - storage devices**:
- Commercial lithium - ion batteries (LIBs) have limited capacity, low power density, cycle instability and safety - related issues.
- Supercapacitors have high power density and long cycle life, but their energy density is much lower than that of batteries.

2. **Limitations of single nanomaterials**:
- Although 2D MoS₂ used alone has a relatively high theoretical capacity (669 mAh g⁻¹), it has problems of irreversibility and poor cycle stability in practical applications.
- Although Ti₃C₂Tₓ has good cycle stability and relatively high electrical conductivity, its capacity is relatively low (theoretical capacity is 320 - 449 mAh g⁻¹).

### Solutions:
By designing and optimizing the heterostructure composed of 2D MoS₂, Ti₃C₂Tₓ and CNTs, the author aims to overcome the limitations of the above - mentioned materials and achieve a synergistic effect, thereby improving the overall performance. Specific goals include:
- **Increasing capacity**: By combining the advantages of different materials, a higher specific capacity is achieved (800 mAh g⁻¹ was reached in the experiment).
- **Improving cycle stability**: Excellent cycle stability and Coulomb efficiency can be maintained even at a high rate (for example, 100% capacity retention is still maintained after 2,000 cycles at 5 A g⁻¹).
- **Enhancing rate performance**: Ensure good performance in the range of low to very high charge - discharge rates.

### Methods:
- **Manufacturing method**: The layer - by - layer spray deposition method is adopted, which is a scalable and cost - effective method and can precisely control the number of layers and thickness.
- **Structural design**: Systematically optimize the composition and architecture of the heterostructure by adjusting the arrangement order and proportion of each layer.

In summary, this paper aims to develop energy - storage devices with better performance through innovative material combinations and manufacturing processes to meet the requirements for high energy density, high power density and long cycle life.